Bluetooth Hybrid Amplifier Receiver PWMA3003BT.NEW
Features:
Bluetooth Connectivity:
What’s in the Box:
Technical Specs:
Extend Warranty Protection and Earn Rewards. Click HERE for Registration
QUESTIONS & ANSWERS
Ask a Question-
Watt rating per channel What wattage speakers do I need
2 x 300 Watt @ 8 Ohm
2 x PADH879 -
los microfonos no estan sincronizados o conectados a el amplificador. como corrijo esa falla?
Asegúrese de que la antena del micrófono esté extendida. También verifique el volumen del micrófono si está configurado correctamente
-
Can I connect this system with all kinds of speakers? powered speakers?
4 Passive speakers only and an active subwoofer
-
what does the NEW. mean in the model number
update version
-
I got my unit second hand, however all of the buttons on the front are broken and I don't have a remote or Bluetooth antenna, any advice?
The unit needs to be sent for repair. However, there will be a corresponding charge for Parts, Labor, and shipping.
-
What is the procedure for the microphones? Mine are not working. I plugged a jack into the front leading to my mixer.
Please contact us through our email support system so you can share images. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Altavoces recomendados, para una sala de 30 m2 ???
PADH1079
-
How do I get the app to use my smart phone thru the sys
Move the selector knob on the far right to BT/MP3 and press mode to select Bluetooth and start pairing
-
Do I have to use a memory card in order for the PWMA3003BT AMPLIFIER to operate
No, it is not necessary
-
Are the PWMA3003BT AMPLIFIER work both dicital and manual and what BT means
Yes, this unit works both Digital and Analog. BT stands for Bluetooth
-
Can i operated this amplifier by just connecting my CD PLAYER
Yes. you can connect the CD player to this unit
-
Regarding to my previous question. Yes, there are speaker outputs labeled 5 and 6 on the back panel.
Please contact us through our email support systems we can assist you better. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I connected wired speakers (100 watts, 8-ohm nominal impedance) to output jack 5 and 6 and there was a constant humming noise from the speakers. What cause that humming noise and how can I fix it? Thank you
We don't see an output 5 & 6 on this unit
-
Can I connect an active speaker directly to the amplifier line output jack #4? Thank you
Yes you may add an active speakre
-
The wireless microphone is so low I could not hear it even at the maximum volume. How can I increase the volume of the wireless microphone? Thank you
the controls for the mics are the volume controls on the front
-
The wireless microphones are so low even at the maximum mic volume. Is there any way to make it louder? Thank you
The only mic control are the mic volume on the front panel
-
What kind of cable to connect from the receiver to the main speaker?
14 AWG speaker wire
-
My bluetooth was working fine on the day of opening , a few hours later the bluetooth cannot be found by any device.Please help.
Try to use different devices to connect with the unit to see difference.
-
How long do the wireless mic's last before the battery needs replaced?
It depends on the usage of the microphone. Normally it takes 2-3hours.
-
I just bought the Unit and was trying to use the Wireless Mics but have no idea how to set them up and connect them to the unit. I dont see it comes with any plugins etc... since they are Wireless how does one go about connecting them to the unit?
The microphone will automatically connect once the unit is turned on.
-
how to connect it pwma3003bt to tv please
There is no option to connect the unit to the TV.
-
how can i connect it to bose surround sound? or any regular speaker?
PWMA3003BT is a 2-channel 4 speaker unit and it is not surround.