Driveway Curb Ramps 11,000lb Capacity Heavy Duty Rubber 4ft 2pc Set

How much does it weight

The SLSPCART65 cart weighs 18.04lbs.

What is the difference between the PCRBDR 24 & 24.5 curb ramp and can I tell the difference by looking at them.

The PCRBDR24 is 24 inches wide, and the PCRBDR24.5 is 24.5 inches wide. They look almost the same, but the 24.5 model is slightly wider.

Are there rods/dowels that align and connect the two ramp pieces together?

Yes, the PCRBDR21 ramp sections are designed to align using built-in connector points with alignment rods/dowels (pin-style connectors). These help keep the two ramp pieces straight and locked together during use, preventing shifting when weight is applied.

If yours didn’t include them or they’re missing, it’s worth checking the hardware bag first—Pyle typically packs them separately. If they’re lost, you can request replacements through support, since the ramps are not meant to be used without those alignment pins for stability.

How heavy is one ramp? Need to know if I can handle the weight to install.

Each ramp section of the PCRBDR21 weighs approximately around 20–25 lbs (9–11 kg) per piece

I live in beverly hills-90210-what store nearby can I view the ramps-home depot doesn’t have them on the floor

You can order this unit online and it will be delivered to your location.

what is the model number for the driveway bridge 2 piece?

This unit is identified by model number PCRBDR21.

My ramps arrived with a card saying "lifetime warranty" that encourages me to register for the Pyle USA warranty. When I register it says my warranty is only for 1 year and 3 months. Is the "lifetime warranty" card false advertising?

1 yr is the standard warranty you can email us to double check the registration to make sure you get the life time warranty option

I have a set of four I bought last year. Any way to connect them together?

https://www.youtube.com/watch?app=desktop&v=_HXtR7-sXxM

I have a curve on my drive way can you cut the ramps to fit …. If so how do I cut them

You may cut it it. Make sure to cut where it does not compromise the strength of the Ramp

Can you glue on the rubber threshold to the concrete? Would 3m 5200 work?

3M Marine Adhesive Sealant 5200 may be able to help. However, check this video link for installation

https://www.youtube.com/watch?app=desktop&v=_HXtR7-sXxM

Do your rubber thresholds float tf I don't anchor them to the concrete gutter? We get regular rains that leave 6 inches of storm water runoff in our gutter.

If the ramps are not linked together. there is a possibility that it can get washed away. It also depends on the water volume and current.

How do u recommend anchoring down

3/8 x 4 (50 pack) Hex Lag Screws with Washers

Wensilon 3/8 * 1-3/4 Lag Shield Anchor

What size tapcon screws should I use to attach to curb and do I need washers? Thank you?

https://www.amazon.com/Stainless-Steel-Hexagon-Screw-Threaded/dp/B0BCVQP11V/ref=sr_1_6?crid=346G0ZIW9B9GE&dib=eyJ2IjoiMSJ9.JWgGrYqo1o-22zLqniGJGN8sdIYVR6ZugRT5tmc1ysoj6AV7vC4FbhT3O2BMM6N0wUzg0OTNV82mWfsdRnbJrYMAH2GinBEu9GbQW87Z_A49KPu1FRmfkYl3_FygGf6IOMglpHmmboRDndSgVFw4HMek4oJlI3bhg_xO-RcQCGoUOcjQl9LdmHlgnTN-M74afHXmPfXV83fkPHpXYG7hVh2n1zlRqiLBUgyGV-b7qwo.uUivpiDCWJODYnAGAFP91rW8e2wFIYcYHIIuof-xesc&dib_tag=se&keywords=hex%2Bbolt%2BBolt%2B3%2F8%2Bx%2B4&qid=1719364169&sprefix=hex%2Bbolt%2Bbolt%2B3%2F8%2Bx%2B4%2Caps%2C293&sr=8-6&th=1


https://www.amazon.com/Tanstic-Premium-Plated-Knurled-Concrete/dp/B09MTNLT8K/ref=sr_1_18?dib=eyJ2IjoiMSJ9.Ml0VI6wYHYjlq0g-8BAsvMz3WrLTOUgIhmi997x0DRynaroaZ5OZWpFKwfttm6PoHZ30kcRWTdFadDzcTZkxtQ.cSbeNuldf-cC5t1SzTLXX1GBvvFt9on238YKcTl2oBY&dib_tag=se&keywords=drop%2Bin%2Bancor&qid=1719364052&sr=8-18&th=1

I need to paint my pyle ramps to match my driveway concert color, do I need to start with a primer, they are 6 month old.

To increase the durability, you'll want to coat your rubber material with an exterior primer before painting. This enables the paint to adhere better for longer life. Then, allow the primer to dry completely before moving on

How do I order cable channels for 4 curb ramps? Online you keep showing nuts and bolts with a hexagon head. That will not work on the channels. There should be no head on either end. Do I order from your company or online. If so what would be the correct size.

https://www.youtube.com/watch?app=desktop&v=_HXtR7-sXxM

Do the 2-piece ramp set come with connecting bolts?

It does not come with bolts. You need to buy them separately

Do you sell the connecting dowls for you your curb ramps?

https://www.amazon.com/16-304-STAINLESS-WASHERS-General-Purpose/dp/B07SFD85Z8/ref=sr_1_5?crid=6L6NBYUKMLOM&dib=eyJ2IjoiMSJ9.yBD3ox3xvDzFmkgzpX_tWiNKUFGjESn3UoqOLzneUSZRCTvcc8_GJTr3rRRSqngXtsH65KLSe3ANjEGs9J_3oe3S52cvyIWSg_POF7qS_uFYRzUv3P5A_ZgXMh0dYMdn8tGizmSjJr3kqoCdaqT4fDAa8Rb_F-VwzvdukIPhRV0vw8KadB35TUy6BcIckXaLdZJxhg0KPQP_0S50nmwP3Gax-OuLDjuZJMcQjoRO_k8.0attyhvTvHlIhKJ0odnQDosNTiG0otxNCuFlUt0F2W8&dib_tag=se&keywords=3%2F8+x+4%22+bolt+%26+nuts&qid=1715727698&sprefix=3%2F8+x+4+bolt+%26+nuts%2Caps%2C454&sr=8-5

Do you sell or recommend hardware to secure the ramps to the concrete?

https://www.amazon.com/Stainless-Bolt-Screws-Pack-Steel/dp/B076CQLZ59/ref=sr_1_17_sspa?crid=2SM2L2GYRK19&dib=eyJ2IjoiMSJ9.jo-u183s_BcLIdmrgX8LLIKl4ihRutP2LmzYgF2TiJQGTUtIEbEBQ8zsN6WCCTQDXEYaD-B-Y-Ws3pd2krUvQuDvU8-aqO-vuXQl59K8PvStZ_vhrk27m_Dbt3Crt7geh9NKKs9ZcQdA-dq0j6NYx9EzGvpvG4jd-b8Vw76AeWbfiJoAUHvKE05XKyxACxxbWbvWYU1H8qQKqpGbTPZt5nt-C-4xsY_0pW_RMlpu_ZQ.EvGCLMrUgL7ykOzRU11tYj1I_8tnLxDlV6hJTCBC_K8&dib_tag=se&keywords=3%2F8%2Banchor%2Bbolts%2Bfor%2Bconcrete&qid=1713886360&sprefix=3%2F8%2Banchor%2Bbolts%2Caps%2C309&sr=8-17-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&th=1


https://www.amazon.com/Wensilon-Shield-Concrete-Anchors-Masonry/dp/B0CKF48B8M/ref=sr_1_29?crid=2SM2L2GYRK19&dib=eyJ2IjoiMSJ9.q47IhJ1y6LlygL8dp_WhAk_5p7_0mU1e9GG9yREG1l__tbwFHSUhoH_6_cMXA4uB86TPf4E8Rjm4db_1d6jhd9hAZAdPqq82QaltJph0MYVRk6xcZw0mpvAn6lBL-on0ElT15hmx2MLsl90SUgNQnRqiLiRgHfqljWiWeo_MhNEIzIfjJWbLjBT5elQbcNuR.-oGEaHQlMU_4SrYwsoUlsIn7LWkrQHRBZeRhkPxfcgI&dib_tag=se&keywords=3%2F8%2Banchor%2Bbolts%2Bfor%2Bconcrete&qid=1713886475&sprefix=3%2F8%2Banchor%2Bbolts%2Caps%2C309&sr=8-29&th=1

I am on a cul de sac so the curb at our driveway is curved. Do you have a ramp for this?

All Curb Ramps are straight

What are the proper seized bolts, nuts, and washers to connect multiple ramps together?

https://www.amazon.com/8-16x4-Stainless-Screws-Washers-Threaded/dp/B08P533NVZ/ref=sr_1_4?crid=3RH8VXJ90R748&dib=eyJ2IjoiMSJ9.Ksfa8OKiwBlK-pdDjqqgv7d7lUXdIGIULzIZUISKtx8UDEw8RtZg6R69n07scfgUe5ZUcdgmxMDv3Jw2hSrhQYK-ug8D9KCxBMoWn9Lo_NPjC0VpIissFROv-hOBxAlJZ477KdDaHHCKYP1EfHFy8yXusHhivTo83ZB_JjkP-pprTDWhzba3aA_nwHDaegCE7NhR4By-RvJW9fARlugERcQhl8kwHnw-B56U-b_zw8s.RHMAIOxH1cVGFbNEPNUy7WlYSSIbv7BwjaDr0sTQcCg&dib_tag=se&keywords=3%2F8%2Bx%2B4%22%2Bbolt%2Band%2Bnuts&qid=1713565136&sprefix=3%2F8%2Bx%2B4%2Bbolt%2Band%2Bnuts%2Caps%2C298&sr=8-4&th=1

Can these be glued to the cement curb instead of using concrete anchor bolts? If so, what adhesive is recommended?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

How do I order the Cabel channels (rods to connect) the curb ramps?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

what would shipping cost to St George, UT for 2 of them?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

What is the difference between threshold and bridge ramps

Threshold ramps are usually shorter and narrower than bridge ramps, and they are designed to fit over the edge of a single-step or a doorway threshold.

Bridge ramps are usually longer and wider than threshold ramps, and they are designed to span over a gap or a landing between two steps or two doorways.

I just purchased a pair of these cur ramps from Amazon. They arrived today and seem to work well. 1. I want to buy 8 pins for permanent mounting. Will these work on a blacktop street? How do I buy them from you? 2. I want to register this pair of mats for your lifetime warranty. Please advise me how to do that.

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

Is the price of this item PCRBDR21 211.99 for two pieces of just for one single piece.

Price goes for the pair (2pcs.)

When do you expect to have this product back on stock Driveway Threshold Car Curb Ramps PCRBDR21

We do not have any specific timeframe when the unit will be available.

Several have asked what bolt to use to connect them, and your response is always a concrete anchor. That is used to secure them to the concrete, not each other. Please provide the recommended bolt size to secure them to each other.

The recommended bolt size for the Pyle PCRBDR21 is M6 x 20 mm. You will need four bolts, four washers, and four nuts to secure the bumper guard to your vehicle

I just purchased 5 curb ramps and need connecting dowels/pins. Where do I purchase them?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

I have had these for about 4 years and they are starting to Crack. Is there a warranty to them or is that normal?

If the unit is over a year from the date it was purchased, the unit is already out of warranty.

When joining sections together with bolts, washers and nuts, should the sections be snugged together tightly or should the bolts have just a little bit of slack to allow for a little movement in the pieces?

The sections should be snugged together tightly with bolts, washers and nuts to ensure stability and safety. The bolts should not have any slack to prevent movement or separation of the pieces.

How do I connect them together?? I have 3

You can use anchor bolts. Please check this link

https://www.amazon.com/CONFAST-Wedge-Anchor-Zinc-Plated/dp/B0723988J3/ref=sr_1_6?crid=3MHGB1FYOJ2G&keywords=anchor+bolts+for+concrete&qid=1681144016&sprefix=Anchor+bolts%2Caps%2C284&sr=8-6

Do you make an 'end cap' that is ramped so water flowing into the normal flat end will flow over the ramp instead of being diverted out the top and bottom of the ramp? Sort of like the sloped door stop used to wedge under a door to keep it from opening.

We currently don't have an end cap for this

My HOA will not allow the ramps as black. Are the ramps paintable? Can I paint them the a color that is similar to concrete? Thank you, Len

The unit has a rubber material. It is not paintable and will come off soon.

I have purchased 3 of these. Do I use the integrated cutout holes or cable channel at the bottom to hold the together? Please let me know what size of the "rods" for either and material that should be used. Thank you.

Please see the link provided for your reference.

https://www.amazon.com/CONFAST-Stainless-Steel-Wedge-Anchor/dp/B072K3G9F8/ref=sr_1_14?crid=3W5CSEIQ3YS4X&dchild=1&keywords=1%2F4+concrete+anchors+stainless&qid=1619533665&sprefix=1%2F4+Concrete+anchor%2Caps%2C391&sr=8-14

What's the size/diameter of the preformed holes?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

How do you mount these ramps into the cement curb?

These lightweight outdoor threshold car ramps for low cars can be permanently installed in high traffic areas using the integrated mounting holes at the edges of the ramp.

What hardware is needed, recommended to permanently install these ramps?

Here is the link for the bolt of the unit.

https://www.amazon.com/CONFAST-Stainless-Steel-Wedge-Anchor/dp/B072K3G9F8/ref=sr_1_14?crid=3W5CSEIQ3YS4X&dchild=1&keywords=1%2F4+concrete+anchors+stainless&qid=1619533665&sprefix=1%2F4+Concrete+anchor%2Caps%2C391&sr=8-14