Waterproof 4-Channel Bluetooth Marine Amplifier Kit
Waterproof 4-Channel Bluetooth Marine Amplifier Kit
3 Year Warranty
30-Day Returns
Free Shipping in U.S.
Couldn't load pickup availability
About this item
Product Highlights
DETAILS
System Features:
- Compact & Powerful Marine Amplifier
- Universal Design for Stereo System Portability
- Built-in Bluetooth Wireless Music Streaming
- Weatherproof & Water Resistant Design
- Marine Grade Construction
- Integrated Cables & Wires for Easy Installation Setup
- Wired Aux (RCA) Audio Connection
- Ability to Connect & Stream Audio from External Devices
- Perfect for Custom Speaker Powering
- Anti-Thump Turn-On
- Soft Turn On / Off
- LED Indicator Light
- Power Protection Circuitry
- Mounting Brackets for Convenient Placement
- Used for Mobile, Boat and Aquatic Vehicle Applications
Wireless Bluetooth Connectivity:
- Simple Device Setup and Hassle-Free Audio Streaming
- Works with All of Your Favorite Devices
- (iPhone, Android, Smartphone, iPad, Tablet, etc.)
- Bluetooth Network Name: ‘Pyle Amplifier’
- Wireless Range: 30'+ Feet
- Bluetooth Version: 5.0
What’s in the Box:
- 4-Ch. Marine Amplifier
- Waterproof Smartphone/Device Bag
- Smartphone/Device Audio Connection Cable
- Wired Volume Control Unit
Technical Specs:
- 4 x 100 Watts RMS @ 4 Ohm
- 4 x 200 Watts MAX @ 4 Ohm
- 4 x 300 Watts RMS @ 2 Ohm
- Waterproof Marine Grade Rating: IP-65
- 2 Ohm Stereo Stable
- T.H.D: 0.05%
- S/N Ratio: > 95 dB
- Channel Separation: > 65 dB
- Frequency Response: 10-40 kHz
- Fuse: 10A
- Power: DC 12V
- Amplifier Dimensions (L x W x H): 6.1’’ x 3.4’’ x 1.4’’
What's In The Box
MANUALS & DOWNLOADS
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
What cable do you use to connect to the input side of the amp. I am using the amp in conjunction with a Pyle PLCD 54MP receiver which works great. Unable to tell if amp is on but has power to it. Please advise input cable details.
To connect your Pyle PLCD54MP receiver to the PLMRMB4CB amplifier, you need a standard Stereo RCA Audio Cable (red and white plugs on both ends)
Plug one end of the RCA cable into the Rear RCA Line Outputs on the back of your PLCD54MP receiver, and connect the other end directly to the Stereo RCA Input Jacks on the amplifier's input harness. Once connected, peel back the amplifier's rubber watertight plug and make sure the internal INPUT LEVEL switch is clicked to the LINE position.
If your amplifier is getting power but you can't tell if it is turning on, the issue is almost always the Blue Remote Turn-On Wire. Amplifiers require a secondary 12V ignition trigger signal to boot up. To fix this:
Locate the Blue wire coming out of the PLMRMB4CB amplifier harness
Locate the matching Blue (or Blue/White) Remote Output wire coming from the back harness of your PLCD54MP receiver.
Splice these two blue wires together.
When you turn on your receiver, it will send a 12V signal down that blue wire to automatically kick the amplifier out of standby mode. When the amplifier turns on successfully, the control compartment behind the watertight rubber plug will light up.
-
How can I tell if it is working
There should be a LED indicator to tell if it is receaving power
Every order includes:
- Choosing a selection results in a full page refresh.
- Opens in a new window.