{"id":6552884543523,"title":"2-Ch.Hum\/Noise Eliminator","handle":"phe400","description":"Almost all 60Hz AC hum is caused by ground loops that act like radio antennae (loop antenna). The Hum Eliminator completely eliminates this by breaking the ground loop, making it impossible for the signal lines to pick up the AC hum and noise in the first place. Unbalanced lines are more susceptible to picking up electrical noise and RF interference than balanced lines - the longer the unbalanced cable, the greater the chance of a problem. Using this device to connect two pieces of equipment is one of the most cost-effective ways to convert between unbalanced signals and true balanced signals. Automatically Translates Signal Voltages to Match Difference in Ground Potentials.\u003cul\u003e\n\u003cli\u003e60 Hz Noise RemovaL - High-Performance Ultra-Compact Design - Automatically Translates Signal Voltages to Match Difference in Ground Potentials\u003c\/li\u003e\n\u003cli\u003eRemoves AC Hum Noise - 1\/4-Inch TRS Phone and XLR Inputs and Outputs on 2-Channels \u003c\/li\u003e\n\u003cli\u003eBreaks Ground Loops Safely - Audiophile High-Quality Components and Exceptionally Rugged Construction\u003c\/li\u003e\n\u003cli\u003eMaintains Highest Sonic Quality - Automatically Converts Unbalanced to Balanced Signal Without Any Signal Loss\u003c\/li\u003e\n\u003cli\u003ePassive Device: No Power Required - Uses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- TABS --\u003e \u003c!--Details--\u003e\u003ch5\u003eDETAILS\u003c\/h5\u003e \u003cbr\u003e\u003cli\u003e60 Hz Noise RemovaL\n\u003c\/li\u003e\u003cli\u003eRemoves AC Hum Noise\n\u003c\/li\u003e\u003cli\u003eBreaks Ground Loops Safely\n\u003c\/li\u003e\u003cli\u003eMaintains Highest Sonic Quality\n\u003c\/li\u003e\u003cli\u003ePassive Device: No Power Required\n\u003c\/li\u003e\u003cli\u003eHigh-Performance Ultra-Compact Design\n\u003c\/li\u003e\u003cli\u003e 1\/4-Inch TRS Phone and XLR Inputs and Outputs on 2-Channels \n\u003c\/li\u003e\u003cli\u003eAudiophile High-Quality Components and Exceptionally Rugged Construction\n\u003c\/li\u003e\u003cli\u003eAutomatically Converts Unbalanced to Balanced Signal Without Any Signal Loss\n\u003c\/li\u003e\u003cli\u003eUses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines\n\u003c\/li\u003e\u003cli\u003eAutomatically Translates Signal Voltages to Match Difference in Ground Potentials\u003ch5\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/manuals.pyleusa.com\/PDF\/PHE400.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003ePHE400 - Manuals\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e","published_at":"2023-12-20T14:35:50-05:00","created_at":"2021-04-23T10:35:09-04:00","vendor":"Pyle","type":"Musical Instruments","tags":["Instrument Accessories"],"price":3899,"price_min":3899,"price_max":3899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40212300333091,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PHE400","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2-Ch.Hum\/Noise Eliminator","public_title":null,"options":["Default Title"],"price":3899,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"068888738293","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/pyleusa.com\/cdn\/shop\/files\/PHE400.jpg?v=1717746640","\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_closeup.jpg?v=1717746640","\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_front.jpg?v=1717746640","\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_bottom.jpg?v=1717746640","\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_lifestyle.jpg?v=1717746640"],"featured_image":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400.jpg?v=1717746640","options":["Title"],"media":[{"alt":"product image number 1 for Pyle 2-Ch.Hum\/Noise Eliminator","id":25836609765411,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400.jpg?v=1717746640"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400.jpg?v=1717746640","width":1000},{"alt":"product image number 2 for Pyle 2-Ch.Hum\/Noise Eliminator","id":25836609798179,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_closeup.jpg?v=1717746640"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_closeup.jpg?v=1717746640","width":1000},{"alt":"product image number 3 for Pyle 2-Ch.Hum\/Noise Eliminator","id":25836609830947,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_front.jpg?v=1717746640"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_front.jpg?v=1717746640","width":1000},{"alt":"product image number 4 for Pyle 2-Ch.Hum\/Noise Eliminator","id":25836609863715,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_bottom.jpg?v=1717746640"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_bottom.jpg?v=1717746640","width":1000},{"alt":"product image number 5 for Pyle 2-Ch.Hum\/Noise Eliminator","id":25836609896483,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_lifestyle.jpg?v=1717746640"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/pyleusa.com\/cdn\/shop\/files\/PHE400_lifestyle.jpg?v=1717746640","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Almost all 60Hz AC hum is caused by ground loops that act like radio antennae (loop antenna). The Hum Eliminator completely eliminates this by breaking the ground loop, making it impossible for the signal lines to pick up the AC hum and noise in the first place. Unbalanced lines are more susceptible to picking up electrical noise and RF interference than balanced lines - the longer the unbalanced cable, the greater the chance of a problem. Using this device to connect two pieces of equipment is one of the most cost-effective ways to convert between unbalanced signals and true balanced signals. Automatically Translates Signal Voltages to Match Difference in Ground Potentials.\u003cul\u003e\n\u003cli\u003e60 Hz Noise RemovaL - High-Performance Ultra-Compact Design - Automatically Translates Signal Voltages to Match Difference in Ground Potentials\u003c\/li\u003e\n\u003cli\u003eRemoves AC Hum Noise - 1\/4-Inch TRS Phone and XLR Inputs and Outputs on 2-Channels \u003c\/li\u003e\n\u003cli\u003eBreaks Ground Loops Safely - Audiophile High-Quality Components and Exceptionally Rugged Construction\u003c\/li\u003e\n\u003cli\u003eMaintains Highest Sonic Quality - Automatically Converts Unbalanced to Balanced Signal Without Any Signal Loss\u003c\/li\u003e\n\u003cli\u003ePassive Device: No Power Required - Uses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- TABS --\u003e \u003c!--Details--\u003e\u003ch5\u003eDETAILS\u003c\/h5\u003e \u003cbr\u003e\u003cli\u003e60 Hz Noise RemovaL\n\u003c\/li\u003e\u003cli\u003eRemoves AC Hum Noise\n\u003c\/li\u003e\u003cli\u003eBreaks Ground Loops Safely\n\u003c\/li\u003e\u003cli\u003eMaintains Highest Sonic Quality\n\u003c\/li\u003e\u003cli\u003ePassive Device: No Power Required\n\u003c\/li\u003e\u003cli\u003eHigh-Performance Ultra-Compact Design\n\u003c\/li\u003e\u003cli\u003e 1\/4-Inch TRS Phone and XLR Inputs and Outputs on 2-Channels \n\u003c\/li\u003e\u003cli\u003eAudiophile High-Quality Components and Exceptionally Rugged Construction\n\u003c\/li\u003e\u003cli\u003eAutomatically Converts Unbalanced to Balanced Signal Without Any Signal Loss\n\u003c\/li\u003e\u003cli\u003eUses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines\n\u003c\/li\u003e\u003cli\u003eAutomatically Translates Signal Voltages to Match Difference in Ground Potentials\u003ch5\u003eMANUALS \u0026amp; DOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/manuals.pyleusa.com\/PDF\/PHE400.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003ePHE400 - Manuals\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e"}
  1. Home
  2. ALL
  3. 2-Ch.Hum/Noise Eliminator

2-Ch.Hum/Noise Eliminator

Previous Product | Next Product
$38.99
Maximum quantity available reached.
Product Description
Almost all 60Hz AC hum is caused by ground loops that act like radio antennae (loop antenna). The Hum Eliminator completely eliminates this by breaking the ground loop, making it impossible for the signal lines to pick up the AC hum and noise in the first place. Unbalanced lines are more susceptible to picking up electrical noise and RF interference than balanced lines - the longer the unbalanced cable, the greater the chance of a problem. Using this device to connect two pieces of equipment is one of the most cost-effective ways to convert between unbalanced signals and true balanced signals. Automatically Translates Signal Voltages to Match Difference in Ground Potentials.
  • 60 Hz Noise RemovaL - High-Performance Ultra-Compact Design - Automatically Translates Signal Voltages to Match Difference in Ground Potentials
  • Removes AC Hum Noise - 1/4-Inch TRS Phone and XLR Inputs and Outputs on 2-Channels
  • Breaks Ground Loops Safely - Audiophile High-Quality Components and Exceptionally Rugged Construction
  • Maintains Highest Sonic Quality - Automatically Converts Unbalanced to Balanced Signal Without Any Signal Loss
  • Passive Device: No Power Required - Uses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines
Sku: PHE400
Vendor: Pyle
Ask a Question

  • 60 Hz Noise RemovaL
  • Removes AC Hum Noise
  • Breaks Ground Loops Safely
  • Maintains Highest Sonic Quality
  • Passive Device: No Power Required
  • High-Performance Ultra-Compact Design
  • 1/4-Inch TRS Phone and XLR Inputs and Outputs on 2-Channels
  • Audiophile High-Quality Components and Exceptionally Rugged Construction
  • Automatically Converts Unbalanced to Balanced Signal Without Any Signal Loss
  • Uses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines
  • Automatically Translates Signal Voltages to Match Difference in Ground Potentials

    • PHE400 - Manuals

    QUESTIONS & ANSWERS

    Ask a Question

    • Will the PHE400 (2-Ch.Hum/Noise Eliminator) operate also like a signal splitter? For instance, if I plug a XLR microphone in, will the signal produce from both the XLR male output AND the 1/4" TRS output?

      Yes

    • Hi. I received my Hum/Noise Eliminator 2-channel box for my bass guitar rig. I have a humming noise when I turn up my volume. Do I plug a cable from my bass to the "In" on Channel #1, and the another cable from the "Out" channel from Channel #1 to where I normally plug my bass to my amp? In addition, would I need to also plug the amp output to an Input channel #2 and the output #2 from your device to the cabinet? I know it may be a simple question but I have to ask. Thanks.

      Only use this for low signal applications such as your instrument. Amp speaker output to Speaker cabinet is not applicable

    • Hello, I've just received the PHE400 and plugged it in between the microphone output (via 48V phantom power supply) and the microphone input on my computer (Acer Aspire). I've tried two different inputs, the regular headset jack (Realtek sound chip) and Creative Soundblaster Play3 external USB soundcard). Each time I get a buzz. I DON'T get any buzz when using my regular headset in either input. And I also only get a slight hum when I *bypass* the hum eliminator and plug the mic input in directly (which is why I bought it in the first place). So is your product faulty? Or am I doing something wrong? (I'm in Thailand, where we have 220V and 50Hz mains electricity.)

      Please contact us through our email support system so we can assist you further. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

    • Hi, I'm trying to eliminate what appears to be a ground loop hum/buzz in my guitar amp. Would your product also work on the Australian mains electricity voltage and frequency? (230V and 50Hz) Thanks

      Yes

    • Do you have any frequency response data for this product?

      There is no Frequency response on our data sheet

    • Does it have 1:1 isolation transformer or 11:1 isolation transformer?

      Uses 11:1 Isolation Transformers to Break Loop Antenna and Balance Audio Lines

    • Can i Use this device between my Mixer out (ST out - Yamaha MG32/14FX 32) and my powered Speaker?

      Yes you may

    • I just want to transform an unbalanced signal into a balanced one, like a direct box. Does this device work?

      Yes this works

    • Supports phantom power? And the other question is if eliminates the RF interference. Thanks for your help!

      The PHE400 does not support phantom power. Also, it can eliminate the RF interference that is caused by ground loops, which are unwanted currents that flow through the ground wires of audio equipment.

    Similar Products  

    2-Ch.Hum/Noise Eliminator has a rating of 5.0 stars based on 2 reviews.