Mini Stereo Power Amplifier
Features:
- Bluetooth Wireless Audio Streaming Receiver
- 2-Channel Amplifier System
- Front Panel Button Control Center
- RCA REC Output
- 1/4'' MIC Input Jack
- 1/4'' Headphone Jack
- Power On LED Indicator
- Blue LED Output Level Display
- 3.5mm Aux CD/MP3 Input Jack
- Switchable MIC Pager & Mixing Modes
- Four Push Type Speaker L/R Terminals
- Switchable AUX1/AUX2/CD and RCA Input
- Bass, Treble, Balance, Master & Mic Volume Controls
- Convenient Audio Source Control for Home or Office Use
Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Bluetooth Devices
- (iPhone, Android, Smartphone, iPad Tablet PC, etc.)
- Bluetooth Network Name: ‘PYLEUSAY’ or ‘BT’
- Bluetooth Version: 5.1
- Wireless Range: Up to 30’+ ft.
What’s In The Box:
- Audio Amplifier
- RCA Cable
Technical Specs:
- Power Output: 2 x 120 Watt
- Amplifier Design: 2-Channel
- Impedance: 4-8 Ohms
- Frequency Response: 20Hz - 20KHz
- Signal to Noise Ratio: >81dB
- T.H.D.: <0.3%
- Headphone Jack, ¼’’
- Digital File-type Compatibility: MP3, WMA
- Maximum USB/SD Flash Support: Up to 64GB
- Power Cable Length: 4.2 ft.
- Power Supply: 120/240V, Switchable
- Dimensions (L x W x H): 5.39’’ x 8.27’’ x 2.72’’ –inches
QUESTIONS & ANSWERS
Ask a Question-
can this be used between a turntable with a preamp and a pair of passive speakers?
Yes
-
can you use the Rec Out output for an amplified speaker?
Yes, you can
-
I am a bit confused, I am not sure if I hooked everything up right. So, from my tuner {receiver) I ran the speaker wires to the PTA4 1st, then jump another set of wires from the PTA4 to the speakers? Also, I hooked my Turntable RCA wires & ground to my Receivers Phono imputs then ran those to the Aux 1 on the PTA4? Help, dont want o burn down the house. Thanks
Running a speaker wire to the PTA4 is not correct.
From your Tuner Receiver, you should run an RCA Audio output/Preout going to the AUX of the PTA4 and make sure the selector knob on the front is properly set as well then run a speaker wire from the PTA4 to your speakers -
I do not see The Mode button to enable pairing on the back of the unit? I have the PTA4 Unit and can not seem to pair with any of my devices via Blue Tooth. Please advise
The PTA4 does not have a Bluetooth receiver. There was a miss print on the listing
-
Where's the bluetooth antenna and/or input? i don't see it anywhere.
You can locate the BT antenna at the back of the unit. You can press the "Mode" Button to reach the BT mode, once BT is set up you can just pair your preferred device.
-
Hi, Purchased the PTA4 via Amazon, excellent product, they made Bose speakers (>20 y/o) sound like never. Love inputs for piano aux etc. Im sure Amp is fine , but when I turn on smmall desk fan Popping sound comes , also when changing speed on fan.only the fan, have it hokked up to Mac , digital piano phone BT. Any suggestions?
Its an electrical static. Which you may need to have a voltage stabilizer.
-
When and why did you change the design of your pta4 amplifier? I have two and inside things are moved from one side to the other. What was the reason for the switch?
-
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
-
I can connect this to any apple device seamlessly, but I am unable to connect it to any Alexa device. Not one Alexa device will even find the Bluetooth that it emits. How do I connect this to my Amazon Alexa devices?
The unit is not compatible to any Alexa devices.