Powered Bluetooth Amplifier Receiver
Features:
- 6-Channel Powered Amplifier Receiver
- Multi-Zone Audio Control System
- Built-in Bluetooth for Wireless Audio Streaming
- Microphone Talk-Over / Voice Priority Function
- Front Panel Control Center with Digital LCD Display
- Aux (3.5mm) Audio Input Connector
- Connect & Stream Audio from External Devices
- USB Flash Drive Reader for Digital Audio File Playback
- USB Port Doubles as Device Charge Port
- (2) 1/4'' TRS Microphone Input Jacks
- (3) Pair RCA (L/R) Aux Audio Input Connectors
- (6) Pair Speaker Binding Post Output Connectors
- RCA (L/R) Audio Line Output Connectors
- Microphone Talk-Over / Voice Priority Level Control
- Independent Channel / Aux Input / Microphone Audio Controls
- Audio Input Mode Selectable (BT/USB/SD/FM/AUX)
- Built-in Short Circuit and Over Voltage Protection
- Power ON/OFF Switch
- LED Indicator Lights
- For Home, Office or Business Use
Bluetooth Connectivity:
- Works with All of Today’s Latest Devices
- (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Network Name: ‘PYLEUSA’
- Bluetooth Version: 4.0
- Wireless Range up to 30’+ ft.
What’s In The Box:
- PA Amplifier
- Remote control
Technical Specs:
- Maximum Power Output: 4200 Watt
- MAX Power Output: 6-CH x 700 Watt @ 4 Ohm
- RMS Power Output: 6-CH x 350 Watt @ 8 Ohm
- Construction Material: Iron
- Frequency Response: 20Hz - 20KHz
- Signal to Noise Ratio: ≥81dB
- T.H.D.: <0.1%
- Battery Operated Remote, Requires (1) x CR-2025 Button Cell Battery, Included
- Radio Station Memory: 30 Station Presets
- Digital File-type Compatibility: MP3, WMA
- Maximum USB/SD Flash Support: 64GB
- Power Supply: 120/240V
- Dimensions (L x W x H): 16.9’’ x 11.5’’ x 3.4’’ -inches
QUESTIONS & ANSWERS
Ask a Question-
Hi all. I have 3 of your Pyle PT6000CH Amplifiers. They've been excellent but one of the 3 needs the on/off power switch. Can you all provide one for purchase or lead me to one ?
Please check the link
https://www.amazon.com/Twidec-Position-Toggle%EF%BC%88Quality-Assurance-Years%EF%BC%89KCD2-201/dp/B07MV52SRM/ref=sr_1_100?keywords=replacement+rocker+switch&qid=1639446270&sr=8-100 -
Can I have one/two channel(s) at 8 ohms, two at 4 ohms, and leave 2 open for the future?
Yes that is possible
-
My client purchased your pt6000ch amplifier to power their thirteen 70v (multi-tap selectable impedance) speakers - all wired in parallel. It appears your amp might work just fine with a few speakers set for low impedance (4 at 7.5 ohms for example) but it’s not designed to support high impedance (in excess of 100 ohm) loads. Please comment in reply.
PT6000CH is not will not work with the 70 Volt speakers
-
Do you have a 70v amplifier that with 1000 watts or more?
We do not have 1000Watts 70 volts amp
-
why am i barely hearing my voice when using microphone
Microphone No Sound. Check the following:
*Use a dynamic Microphone
*The microphone is not turned on
*The microphone cable is either loose or not
functioning
*The microphone volume for that channel is set
to minimum
*The microphone is not functioning correctly