Hi-Fi Bluetooth Home Theater Receiver
Features:
- 7.1 Channel Receiver System
- AV (Audio/Video) Stereo Amplifier
- Hi-Fi Home Theater Surround Sound
- Built-in Bluetooth Wireless Audio Streaming
- Next-Gen Audio DSP Sound Processing Technology
- 3D Video & Blue-Ray Video Pass-Through Support
- Digital Dynamic VFD Display with AM/FM Radio
- Connect & Stream Audio from External Devices
- MP3 Digital Audio Support
- USB Flash Drive Reader
- Connection Interface: (3 IN+1 OUT) x HDMI, RCA (L/R), Speaker Binding Posts, Optical/COAX Digital Audio
- HDMI Output + Dedicated RCA Subwoofer Output
- (2) 1/4’’ -inch Microphone Inputs
- Independent Input Source Selection
- Digital Graphic Audio Output Level Display
- Mic Echo, Bass, Treble, Volume Control Adjustment
- Over Current, Short Circuit, and Over Voltage Protection
- None Compatible with Apple TV and Dish Network
- None Compliant with (HDCP) High-bandwidth Digital Copyright Protection
Wireless Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instantly Receives Wireless Music Streaming
- Works with all of Today’s Latest Devices
- Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Version: 5.0
- Bluetooth Network Name: ‘PYLE PRO’
- Wireless Range: 30’+ ft.
What’s in the Box:
- AV Receiver
- Remote Control
- Power Cable
Technical Specs:
- Power Output: 2000 Watt MAX
- Amplifier Receiver Type: 7.1-Channel
- Speaker Impedance: 4-16 Ohm
- S/N Ratio: >80dB
- T.H.D.: <1%
- Radio Station Memory: 30 Presets
- Digital Audio File Support: MP3 / WMA/APE/FLAC
- Maximum USB Flash Support: Up to 1TB
- Battery Operated Remote Control, Requires (2) x ‘AAA’ Batteries, Not Included
- Power Cable Length: 3.9’ ft.
- Power Supply: 115V/230V, switchable
- Total Unit Dimensions (L x W x H): 16.9’’ x 13.8’’ x 5.5 ’’ -inches
QUESTIONS & ANSWERS
Ask a Question-
Can an external amplifier be used with this model? If so, how do I hook it up? Is it with the auxiliary input?
It is not possible to connect an external amp since the unit does not have a Direct output
-
How do you change the output to the Headphone Jack?
How you change the output on your regular speakers is also the same with your headphones
-
What is the RMS for this? What speaker system & wattage do you recommend for the best quality of sound?
250Watts per Channel
-
Are PDICBT652RD Speakers compatible with the Pyle PT796BT receiver? Do they need cables home run from each to the receiver?
The speakers are stand-alone and does not require an external amp
-
what selector position should be chosen to get tv audio using the arc out hdmi connection
Simply press the HD ARC to turn it on
-
What speakers do you recommend for this unit.
It can be the wall-mounted PDWR50B or the In-wall PDIW87 and for the Center Speaker the PDIWCS56. Lastly the PDIWS10 for the Subwoofer
-
I purchased this receiver as a backup for when my other receiver got sick. It did and I hooked this one up but couldn't get it to show any kind of a display and was guessing in the dark as to what was happening. The instructions showed to push the 'main menu' on the receiver and I never found a menu button of any kind on either the receiver nor the remote. Anyway, do you work on them? This was fresh out of the box and all I could hear was the subwoofer with, again, no display. If you don't work on them could you tell me who in America does, please? I live in Arkansas and would like to know where the closest repair center would be from here. Thank you for your time and any trouble this may cause you.
Please contact us through our email support system so we can assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Are there interior fuses other than the F8AL250V fuse at the power plug? I plugged a record player into the phono hook-up using RCA wires and the eternal speakers crackled very loudly, I then heard a pop then the smell of of burning/melting or possibly a fuse blowing... It now shows PROTECT on the display screen.
When connecting an external audio source. The volume control should always be at the lowest to prevent a sudden blast of sound. Please check your warranty options and send the unit for repair
-
Watts per channel?
250Watts
-
I recently bought this Pyle Pt796bt amplifier/receiver and it does seem to retain its memory when you power off and on. If I adjust levels such as center channel, surround channels, subwoofer level etc, when I power it down and then power it up again, these values default to its factory settings. How can I retain my settings without having to do it everytime I power up?
There is no option to save the system settings
-
What is the paring code for the remote? I need to program my TV control volume button
The unit is not compatible with universal remote control
-
How can i save my speaker sound settings every time i turn the receiver off i lost the settings
There is no option to save the settings on the unit
-
Is there anything I can do in order to extend the BT range.
-
voltage slide selector, which way to 115 volts?
The default setting for voltage is 110V there should be an engraved marking on the switch
-
If I hook up two 8 ohm polk atrium 5 speakers that are 20W to 100W speakers how will this do? At 8 ohms two channels what are the Watts on each channel
Yes, it is possible to connect two 8 ohms, speakers, to one channel. It makes the impedance 4 ohms.
The unit gives a Max 250 Watts per channel -
If hdmi input is not connected, but optical input is connected, will the hdmi out has audio signal out?
Yes, it will have audio out
-
What surround sound format and versions does this unit use (i.e. Dolby, DTS, THX)?
It uses a Digital algorithm that is similar to Dolby surround processor
-
I tried to reduce the echoing on my TV with Pyle PT796BT model, but it will not reduce. What do you suggest that I do?
Please contact us through our email support system so we can share a video. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Can I buy a replacement remote for this model?
The remote control is currently out of stock
-
Does the 7.1 audio configuration work from a hdmi input, or does it only work when 7.1 rca inputs are used on the pt796bt model?
It should work7.1 through HDMI using a ultrahigh-speed HDMI cable
-
When I hooked up my hdmi arc all I got was loud static through the speakers. I have a high speed 4k hdmi arc cable with ethernet and the TV is set to arc output. I attempted to hook it up using the optical cable but got the same result.
using the optical cord. the TV needs to be set up to Optical digital out as the default
-
The sub woofer audio out seems to require a 2-wire pair which would have to be connected to an RCA adaptor in order to connect with the RCA in of the sub woofer. Is that correct?
RCA Subwoofer out to an Active/Powered Subwoofer
https://www.amazon.com/Monoprice-High-quality-Coaxial-Audio-Video/dp/B003L13C64/ref=sr_1_11?crid=33O8LJVZP8BL8&dchild=1&keywords=subwoofer+rca+cable&qid=1632262956&sprefix=Subwoofer+RCA%2Caps%2C397&sr=8-11 -
como conectar bluetooth
Simplemente presione el botón mp3 / BT y seleccione Bleutooth. luego empareja tu teléfono
-
hello, is there a way to keep the sound level the same so when you go to stand by you don't' have to readjust the sound level again
It has a preset volume level that is why the volume always resets
-
Speaker hookup?
It is a straightforward connection for Passive speakers. Simply connect positive to positive and negative to negative
-
press main menuon the panel can you tell me where is it can not finde please help
it is the Mode button
-
What is the warranty on the PT796BT?
#0 days replacement for the seller and 1-year parts and service from the manufacturer
-
How can I set this receiver up as a 2 zone receiver? I would like to use 5 surround sound speakers for the TV in one room and the 2 extra speakers in another room for music.
The unit does not have a Zone 2 output
-
why are you selling these on Amazon for 252.00??
Amazon uses a different approach in its sales strategy
-
How can i order a new remote?
The remote control is currently not available
-
how to connect the antenna , both wires are gold color , which one is positive and negative?and it does not say whether it is a fm or am antenna
Black loop antenna is for AM
White wire is for FM -
Is there a way to launch the menu on screen using for example projector screen? or do I have to look at the small display of the receiver only to control the menu?
It is just the small display of the receiver only to control the menu
-
Estoy intentando Conectar el receiver a mi smart TV pero no se escucha, que estoy haciendo mal???
Smart TV solo tiene una salida de audio digital óptica. necesitará utilizar un convertidor de digital a analógico
Por favor revise el enlace
https://www.amazon.com/PROZOR-Digital-Converter-Optical-Toslink/dp/B00KNNSKV0/ref=sr_1_1_sspa?crid=20D4V4IAO3RT4&dchild=1&keywords=prozor+192khz+digital+to+analog+audio+converter&qid=1615265873&sprefix=prozor%2Caps%2C434&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExTFRRTEVMWFBHSE0xJmVuY3J5cHRlZElkPUEwODQwMDIyMzE1VzhNRDBDQ1FZQiZlbmNyeXB0ZWRBZElkPUEwNDQyMzE2MUtSVlpKNkdIUlJDViZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= -
Hi, I just bought this receiver through Amazon and would like to download the manual. Unfortunately, the download link (here under "Manuals & Downloads" is broken. In fact, you might want to be made aware that "every" manual link on this entire site is broken and returns a 404. The receiver in question is the PT796BT. If you can send me working link to the manual that would be great. And/or feel free to send as an attachment. Thanks.
-
1.How many watts is the amp? 2. Can you Harmony 700 universal remote with this unit?
250 watts MAX per channel x8 Remote control can not be sync with universal remote control
-
How do you calibrate your speakers with the Pyle PT 796 BT?
Manually through the remote control
-
Tienes envío a México
Shipping is within the US only
-
mauuals and dowloads will not come up.
Please see the link:
file:///C:/Users/User/Downloads/PT796BT%20-%20Manuals.pdf -
I have a Pyle PTAU45, can I hook that to this amp also?
PTAU45 can be hooked to PT796BT
-
Do you consider the “multimedia “ box the cable box?
Do you mean support cable box? Yes, the unit has an Optical audio in, Coaxial digital, HDMI/HDMI ARC, and RCA connections
-
can I hook up phono, cd player and cassett
You can hook up Phono / CD or Cassette
-
can I hook phono, cd player and casset all together
You can hook up Phono and CD or Cassette. There are two inputs at the back of the unit
-
How to hook up a powered sub woofer with one rca jack?
Powered Subs only needs one RCA cable connector
-
Pt796bt says impedance: 4-16 ohms Is that 4 ohms per channel What ohms speakers would be to much or to less to use on this receiver I have a set of pioneer surround sound speakers that are 6 ohms ???
The impedance is per channel
As long as your speakers are within the range of 4 to 16 ohms that will be fine -
is this a 2020 model?? is this the top of the line and most powerful?
Yes, this is our latest model. This was released just this November
-
Video won't work
TV should only be connected to the HDMI ARC OUT of the PT796BT to the HDMI ARC of the TV
Both receiver and TV has to have the ARC or CEC feature activated or turned on -
Can this receiver be left outside in the winter months What’s the operating Enviroment rating
No this unit can not be left outside on the winter months
-
How do I hook up an equalizer to a pt796bt
The unit does not have a loop IN and OUT
-
I just unboxed my pt796bt. Radio works fine. Blue tooth works fine so I know my speakers are correct. But any input (digital, analog) just makes a fuzzy sound and no actual audio. I have tried multiple channels, options, I can’t get any Audio input to work.
If a TV is being connected there are some setting needs to be done on the TV
-
why is the instruction Manuel useless it says on page 8 press THE MENU BUTTON ON THE CONTROL PANEL where is it?
Please disregard the Menu button instruction on the manual since the function under the menu is available on the remote control. Bass, Treble, Balance and Volume. Same functions are also available directly on the Main panel of the unit
-
Can I use banana plugs to connect the speaker to the receiver instead of the binding posts will that work
YES
-
Can I use it as a 5.1 surround sound until I get my other 2 speakers to make it 7.1
Yes
-
does receiver only do pcm and not Dolby digitalor Dolby Atmos ? when I try Dolby I only get a digital static sound
For Optical connection It uses PCM
For HDMI connection It uses Digital Algorithm
-
Hello, I just received an email responding to my inquiry on the PT796BT regarding watts per channel. It said Cheers Pyle USA .... and stated this receiver had 250 watts per channel (8 ohm) which is what I need but one more question ... I was on line chatting this afternoon here at your site and the agent said it was only 100 watts per channel, hopefully he was mistaken but we need to make sure before ordering. Thank you for your help. Sincerely, George Dragon
250 watts Max per channel (8 ohm)
-
Hi, We are wondering how many watts per channel when using two 8 ohm speakers, thank you
250W Max per channel
-
Good morning. where can i locate pyle pt796bt phono input ground terminal? how do i hook up ground from tmy turntable to receiver?
The PT796BT does not have a Ground Terminal. As long as the turntable has a good Grounding system. However, if you need to use the ground wire just locate an nearest screw and loosen it to insert the ground wire and tighten it back
-
Good morning. where can i locate pyle pt796bt phono input ground terminal? how do i hook up ground from tmy turntable to receiver?
PT796BT does not have a Ground screw. as long as the turntable has good Grounding it should be fine but in case you need to connect the ground wire, just loosen a nearest screw and insert the ground wire and tighten it back
-
Does the phono input have built in preamp?
Yes
-
Can I simultaneously use both subwoofer preout for active subwoofer and the passive subwoofer channel simultaneously?
Yes
-
I have a Behringer active subwoofer. Which channel will I plug it in (L/R) left or right?
If this is an Active Subwoofer. You can connect it to the Left channel RCA
-
When I turn the unit on the volume is always at 19 too loud. Why?
It is a default volume level setting
-
Where is the "menu" button on the panel?
There is no Menu button as all functions are already layed out
-
How can I increase the brightness of the display on a PT796BT?
The unit does not have a Brightness controll for the LCD Panel
-
Good pm. I would just like to ask the speaker output power rating per channel. What is the rms speaker power (watts) when driven on 8 ohms? Please promptly reply so I can decide.b Thank you very much
125Watts per channel @8 ohms
-
I've connected my TCL Roku tv HDMI arc to the HDMI arc port on the receiver. Yet, i cannot control volume from the tv to the unit. How is the HDMI arc compatible?
volume controls for each device are controlled separately
-
What is the rms power output per channel of the PT796BT 7.1 receiver
The RMS power output per channel of the PT796BT is 200 watts at 4 ohms, which means it can handle 200 watts of average power from an amplifier for each speaker.
-
What is the rms power output per channel?
The RMS power output per channel of the PT796BT is 200 watts at 4 ohms, which means it can handle 200 watts of average power from an amplifier for each speaker.
-
how do you get a test tone for calibration
Try to connect any Bluetooth ready device to the unit.
-
I'm interested with the Pyle PT796BT 7.1 channels. May I ask what is the unit power rating per channel? RMS and PEAK Power.
• RMS power: 200 watts per channel at 4 Ohms
• Peak power: 500 watts per channel at 4 Ohms -
How many watts for channel including the subwoofer?
250watts per channel
-
Can I buy Bluetooth speakers for this? If so, do you have a recommendation on which one to purchase?
No, this unit will work with a transmitter
-
I have a Pyle amplificador model 796BT 7.1 channel can you send me a diagrama of conection of speakers on the back SBR-SBL SR-SL- CENTER SW FR-FL SW OUT -SW 1- SW2 ?????
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Shipping weight
Weight: 26.68 lbs.
-
just recieved and when plugged in all it says is protect on the screen flashing and a fan turns on and thats all it will do
Does it says protect when there is no speakers connected?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Does the phono input to a RIAA equalizer?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
This does not work with my speakers, all I hear is buzzing , how can I fix that problem?
Check all the wiring connections made with the unit and try to check different speakers to see difference.
-
Best regard. I bought a PT796BT, but it has a problem. The 28 pin IC gets hot in the input voltage area, but at the bottom it has the code 20CMNWC0c e3 printed on it and I can't find its datasheet. I would like to know which one I can replace it with? Thank you very much for your attention and the information you can provide me.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
WHERE to wire in a single bass woofer
The unit does have a subwoofer output using an RCA connection.
-
states "protect" what does this mean no sound either
Amplifier protection mode is a shutdown state that the amp may enter in certain situations. The purpose of the shutdown state is to prevent damage to the amp or other system components.
-
How do you adjust the FR and and FL channels individually
The unit PT796BT doesn't have a separate volume controls for each channel.
-
ON PAGE 9 OF THE MANUAL IT SAYS PRESS "DISPLAY" BUTTON ON REMOTE CONTROL TO ADJUST DISPLAY MODE. WHEN PRESSED IT CHANGES ON SCREEN TO VFD 1,2 OR 3 AND DISAPPEARS, NOTHING ELSE HAPPENS. IS THE DISPLAY SUPOSE TO CHANGE MODE?
To change the mode, press the DISPLAY IN button. The DISPLAY listed on the manual, is the display scree itself.
-
I had PT696BT I switch to PT796BT but I cannot get it to play, it display is reacting like its playing but it not .HELP
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
When I plug in Headphones, the Headphones work, but the speakers keep putting out music, also. How can this be fixed?
Check the speakers that are connected to the unit and change if necessary. Also check the wiring connections made with the unit.
-
There is a hum from each speaker when I connect them. I have disconnected all speakers but 1 and it does it in each speaker. I have a Pyle PT796BT system and surround sound speaker system. I have removed the input and it still hums. I used to have an Onkyo system and didn't have this problem. Looking for suggestions.
Try using different speaker wires when connecting to the unit.
-
cannot get reciever around sound
Press the 7.1 button on the front panel of the unit to activate the 7.1 surround sound feature.
-
How do I connect a PDWM2125 microphone system to my receiver PT796BT so I can use is for an Karaoke?
Using the connector included with the unit, you can plug this unit PDWM2125 in to the amplifier PT796BT.
-
Coje micrófono , conectar micrófono
Si tiene un micrófono con cable, conéctelo a las ranuras de micrófono 1 y 2. Luego, si tiene un micrófono inalámbrico, conecte el conector de 1/4 del receptor base del micrófono a la ranura de micrófono de la unidad.
-
HD ARC not working. Making a weird noise or reads ERR. Not passing tv sound
Check the TV settings and use a hi-speed HDMI cable to connect to the unit.
-
Does it have 4K 120htz passthrough?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
How to use bt Bluetooth
Press the MP3/BT button and locate the BLUETOOTH. Make sure that the Bluetooth mode on your device is turned on.
Check for the Bluetooth Network Name: ‘PYLE PRO’ and have it connected into it. -
are there dvd synchronization setting
No, there is no DVD synchronization setting for this unit.
-
Where can I find the serial number on the pyle receiver, model number PT796BT
The unit doesn't have serial number, it does have the model number only.
-
can i connect optical audio and have 7.1 ???
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
question: press main menuon the panel can you tell me where is it can not finde please help Answer: it is the Mode button This is the question I seek an answer to, but there is no mode button on the front of the panel. It doesn't show one in the manual as well. PT796BT model. My remote has been destroyed by my dog so i can't use that. I need to be able to change the volume but the dial does not change the volume any longer. Please help.
Press the DIGITAL IN repeatedly to select the desired input source.
-
How can I hook up an external equalizer to the PT796T Receiver?
It is not possible as the unit has no Loop output and input
-
I saw a question that dealt with my problem also. The manual mentions a menu button but there is none on the receiver panel or the remote for the PT796BT Receiver. Where is this button or does it have a different name?
The unit does not have a menu button as it has individual specific button for each modes
-
Cooling FAN is loud, even if I put unit on stand-by mode (by design). Is Fan really required, if I am going to use it very low audio volume and not too period of time? I will lose the warranty which is fine to me.
The cooling fan should not be too distructive
-
how many watts rms for the subwoofer output
Subwoofer out through the binding post is 250 Watts Max
-
can i make all 8 speakers work at the same time with the same sound
The only option is 2.1 and 7.1. It only works on a suround mode
-
Hi, How do I get the Pyle PT796BT out of protect mode?
Please try to remove the speakers connected and power on to check if protection turns off. If it continues, please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Hi, to whom it may concern. I have a Pyle Pro PT796BT Receiver. How do I factory reset this device? There's a feature I want to change or want off. It's the Prologic feature that came on and not sure how it did, I can't seem to change this setting nor turn it off. If I'm correct, it's part of Dolby or surround sounds. Also the DSP button don't change this feature. Would really appreciate it if someone can assist.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Where is the operating manual for the PT896BT Amplifier? I clicked the link and got a 404 error. I need to manual
The manual site is currently down at this time
-
Fan is so loud. Any suggestions…???
Try to reach out the seller if the purchase is within 30 days
-
Surround sound not working
It automatically detects the surround sound. if the signal is stereo it will only put out stereo
-
Why does the cooling fan continue to run
It is to keep the system cool at all times
-
Does it have Dolby Atmos support
The unit uses a digital algorythm surround processor
-
I have an HDMI Wire from the TV Arc HDMI Port 4 to the Pyle ARC HDMI Port and I clicked ARC ON, but I'm still not transmitting sound from the TV. When I turn on the Radio Antenna then the speakers all emit sound, so I'm unsure why I can't get the TV sound to transit through the receiver and out the speakers ... any ideas what I'm doing wrong?
Please check this video and see if it helps
-
How do I connect to a speaker I made Bluetooth capable by using a elegant Bluetooth transmitter /receiver.
The PT796BT does not have an Audio Output to connect to a Bluetooth transmitter
-
Is it support Dolby Atmos ?
It uses Digital Surround Algorithm