Mini Stereo Power Amplifier
Features:
- Bluetooth Wireless Audio Streaming Receiver
- 2-Channel Amplifier System
- Front Panel Button Control Center
- RCA REC Output
- 1/4'' MIC Input Jack
- 1/4'' Headphone Jack
- Power On LED Indicator
- Blue LED Output Level Display
- 3.5mm Aux CD/MP3 Input Jack
- Switchable MIC Pager & Mixing Modes
- Four Push Type Speaker L/R Terminals
- Switchable AUX1/AUX2/CD and RCA Input
- Bass, Treble, Balance, Master & Mic Volume Controls
- Convenient Audio Source Control for Home or Office Use
Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Bluetooth Devices
- (iPhone, Android, Smartphone, iPad Tablet PC, etc.)
- Bluetooth Network Name: ‘PYLEUSAY’ or ‘BT’
- Bluetooth Version: 5.1
- Wireless Range: Up to 30’+ ft.
What’s In The Box:
- Audio Amplifier
- RCA Cable
Technical Specs:
- Power Output: 2 x 120 Watt
- Amplifier Design: 2-Channel
- Impedance: 4-8 Ohms
- Frequency Response: 20Hz - 20KHz
- Signal to Noise Ratio: >81dB
- T.H.D.: <0.3%
- Headphone Jack, ¼’’
- Digital File-type Compatibility: MP3, WMA
- Maximum USB/SD Flash Support: Up to 64GB
- Power Cable Length: 4.2 ft.
- Power Supply: 120/240V, Switchable
- Dimensions (L x W x H): 5.39’’ x 8.27’’ x 2.72’’ –inches
What’s In The Box:
Pyle PTA4 Home Amplifier is perfect for powering any stereo system. Complete with AUX/CD inputs, and 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality -- this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.
QUESTIONS & ANSWERS
Ask a Question-
can this be used between a turntable with a preamp and a pair of passive speakers?
Yes
-
can you use the Rec Out output for an amplified speaker?
Yes, you can
-
I am a bit confused, I am not sure if I hooked everything up right. So, from my tuner {receiver) I ran the speaker wires to the PTA4 1st, then jump another set of wires from the PTA4 to the speakers? Also, I hooked my Turntable RCA wires & ground to my Receivers Phono imputs then ran those to the Aux 1 on the PTA4? Help, dont want o burn down the house. Thanks
Running a speaker wire to the PTA4 is not correct.
From your Tuner Receiver, you should run an RCA Audio output/Preout going to the AUX of the PTA4 and make sure the selector knob on the front is properly set as well then run a speaker wire from the PTA4 to your speakers -
I do not see The Mode button to enable pairing on the back of the unit? I have the PTA4 Unit and can not seem to pair with any of my devices via Blue Tooth. Please advise
The PTA4 does not have a Bluetooth receiver. There was a miss print on the listing
-
Where's the bluetooth antenna and/or input? i don't see it anywhere.
You can locate the BT antenna at the back of the unit. You can press the "Mode" Button to reach the BT mode, once BT is set up you can just pair your preferred device.