Marine Waketower Speaker System
Features:
- Pro Audio PowerSport Speakers with RGB Lights
- Amplified (Active + Passive) Speaker System
- Bluetooth Wireless Music Streaming Ability
- Bridged Sound System: (2) x 4.0'' Woofers + (2) x 0.5'' Tweeters
- Marine Grade Waterproof Rated Construction
- Weatherproof & Water-Resistant Housing
- 2-Way Full Range Stereo Sound Reproduction
- Built-in Digital Sound Processing Amplifier
- Integrated Speaker Power & Wiring Harness
- Compact Size & High-Powered Output
- Impressive Bass Response
- Aux (3.5mm) Input Jack
- Connect & Stream Audio from External Devices
- Sleek Design, Machine Molded Speaker Cabinet Housing
- Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
- Used for Off-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Devices
- Smartphones, Tablets, Laptops, etc.
- Bluetooth Version: V4.2
- Bluetooth Network Name: ‘PYLEUSA’
- Wireless Range: 30+ ft.
- *Bluetooth Receiver Module Built-Into Amplifier of Main / Active Speaker
What’s in the Box:
- (1) 4'' Amplified Main Speaker
- (1) 4'' Passive Support Speaker
- Speaker Connection Wires, 6.6' ft.
- Wire Butt Connectors, 16-22 AWG
- (2) 5.9’’ x 0.7’’ x 0.2’’ -inches EVA Pads
- (2) 6.5’’ x 0.7’’ x 0.2’’ -inches EVA Pads
- RGB Connection Wire, 6.6’ ft.
- Remote Control
Technical Specs:
- Speaker Power: 800 Watt MAX
- Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
- Amp Type: 2-Channel, Class D
- Marine Grade Waterproof Rating: IP-X5
- Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
- Tweeter Type: Neodymium Dome (x2)
- Frequency Response: 85Hz-20kHz
- Impedance: 4 Ohm
- Magnet Type: 20 oz. Circuit
- Mid-Woofer Voice Coil Type: 1.0'', Aluminum
- Sensitivity: 90 dB +/- 2 dB @ 1M/1W
- Anti-Thump Turn-On
- Soft Turn On/Off
- T.H.D: <0.05%
- S/N Ratio: >95dB
- Channel Separation: >65dB
- Amp Freq. Response: 10Hz- 30 kHz
- Fuse: 1 x 10A
- Power Supply: DC 12V
- Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.25’’ ~ 2.0’’ -inches
- Remote Control Battery Operated Requires (1) x CR2025 Batteries (Included)?
- Battery Type: 3.2V Lithium-ion 150mAh
- Speaker Dimensions: 5.6’’ x 8.4’’ x 7.3’’ -inches, with Bracket (Each)
QUESTIONS & ANSWERS
Ask a Question-
What is the RMS on the PLUTV44BTR'S?
(2 x 125 Watt RMS)
-
I’m in need of the rbg cable that connects the two speakers together. Where can I purchase this cable?
Please do not hesitate in contacting us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
For Parts Request Please Complete the information below:
Full Name:
Email Address:
Contact Number:
Model Number: PLUTV45BTR
Shipping address:
Requesting Part: PRTPLUTV45RGBC RGB connection wire -
Do I have to run through the amp or do the speakers have the Bluetooth built in?
You need to run through the amp
-
I need a remote how do I order one?
The remote control is currently not available
-
What gauge wire do I need to power these speakers? I currently am using a 16 gauge wire and I believe that is why I am getting feedback. Looking at different websites if I assume (250watts x Av erase usage 0.2 x D Amp 1.5)/12V=6.25Amp with approx 12 foot of wire to power. It looks like I need a 10 gauge wire... (calculations from here: https://jlaudio.zendesk.com/hc/en-us/articles/209635477-Selecting-the-Proper-Size-Power-Wire). Would having the wrong gauge be responsible for the feedback on the speakers?
12 AWG will be just fine
-
Can I link 2 sets together?
These are stand alone speakers system
-
How do I hook it up to my can am outlander 570
The PLUTV45BTR can be installed in front or at the back of the outlander through its railings. Simply power it with 12 volts and it is ready to pair with your mobile device.
-
I have a bazooka sound bar, will these hook to my sound bar?
Linking through Aux is possible but not with Bluetooth since they are both receivers
-
hi guys, can I use an amplifier as power resource instead of connecting the speakers directly to a battery? do they come with all needed wiring or much I purchase any additional wiring? thank you. https://www.amazon.com/Pyle-Waterproof-Bluetooth-Wakeboard-PLUTV45BTR/dp/B087QS2NJD?ref_=ast_sto_dp&th=1&psc=1
These are stand alone speaker system. No need for amplifier
-
How do you turn off speakers after use ? Wired to battery? On and off switch??
You can add an ON and OFF switch to the Positive line
-
How can I Connect the bluetooth to my phone?
once the speakers are on. Search the Bluetooth Network Name: ‘PYLEUSA’ and pair
-
We have the speakers in place an connected to the battery on her hammerhead go kart the lights all come on but it will not pull up the name on ur phone nor will it make a sound like normal Bluetooth makes
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.