8-Ch. Bluetooth Powered Pro Audio Mixer
Features:
- 8-Ch. Audio Mixer System
- Pro Audio Stage Powered Design
- Bluetooth Wireless Music Streaming
- Digital LCD Display
- Front Panel Audio Control Center
- Connect & Stream Audio from External Devices
- MP3 Digital Audio File Support
- USB Flash Drive & SD Memory Card Readers
- Aux (3.5mm) Input Jack
- 3-Pin Low Impedance Balanced Microphone Inputs
- 1/4'' Line/ High Impedance Balanced Inputs
- Headphone Output: 1/4'' TRS Stereo Connector
- RCA & 1/4'' Effects Loop Connectors
- Additional RCA Inputs: Tape Play (L/R), Tape Record (L/R)
- Master 5 Band Graphic Equalizer
- Independent Channel Volume, EQ & EFFX Adjustment
- EQ & Master EFFX Control of Level, Echo & Reverb Controls
- Convenient Carry Handle
- Built-in Cooling Fan
Bluetooth Connectivity:
- Built-in Bluetooth for Wireless Music Streaming
- Simple & Hassle-Free Pairing
- Works with All of Today's Latest Devices
- (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Wireless Network Name: ‘AC46XX’
- Bluetooth Version: 2.1+EDR
- Wireless Range: 30’+ ft.
What's in the Box:
- 8-Ch. Bluetooth Stage Powered Mixer
- Power Cable
Technical Specs:
- Power Output: 800 Watt MAX
- 8 Ohm Impedance Each Channel
- Line Level Impedance 10K Ohms @ -10dBv
- Mono Microphone Inputs (XENYX Mic Pre-Amp)
- XLR: Electronically Balanced Discrete Input Circuit
- Frequency Response: <10Hz–150kHz (-1dB), <10Hz–200kHz (-3dB)
- Gain Range: +10 - +60dB
- Max. Input Level: +12dBu @ +10dB Gain
- Impedance: Approx. 2.6k Ω Balanced
- Signal-to-Noise Ratio: 110dB / 112dB, A–Weighted
- Distortion: (THD+N): 0.005% / 0.004%, A-Weighted
- Channel Equalization: Control Range
- High @ 10K +/-15dB, Low @ 60K +/-15dB
- Master EQ Frequency Hz: 60, 250, 1K, 4K, 12K
- Boost/Cut Control: +/-12dB
- Effects Loop & Send: 1/4'' TS Connectors Unbalanced
- Impedance: Approx 1k Ohm -10dBv
QUESTIONS & ANSWERS
Ask a Question-
Can I use the 1/4" microphone cord on this Pyle PMX840BT audio mixer? For some reason I cannot get any sound out of the microphones and I was wondering if the 1/4" cord might be the problem. I put the gain up on each mic and the master, but I got nothing. Do you have any idea what the problem might be?
The microphone connector is the XLR to XLR. 1/4" is for Line level input only
-
Does this run off a 120 Volt household outlet.
Yes
-
Im looking to power 4) : MTX TP1200 speakers in a Gym. Woofer 12" Sensitivity 92dB (2.83V/1m) Impedance 4Ω RMS Power (Watts) 150W will this do the job? loud gym and need big power and loud volume
We recommend P3001BT to power the 4 MTX TP1200
-
what is the rms
400Wats RMS
-
How do I get warnty for my mixer. It's only a couple weeks old and burnt up
Please do not hesitate in contacting us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I recently restored a set of vintage Peavey 1210HS speakers (200watt 8ohm- 12 woofer, 10 mid, horn each) and I am looking for a Powered Amp to drive them. I was wondering if this would do the job?
Yes, this would work for the speakers
-
Need a fuse
10 Amperes
-
What is the Warranty for Mixer PMX840BT?
30 days replacement/refund from purchase date and one year warranty for parts and service from the manufacturer.
-
My mixer just quit working tonight. Please advise.
Please check the fuse right at the back of the unit below the power cord socket
-
I need owners manual for model NO: PMX340BT 8 channel powered mixer with BT wireless audio.
-
Why will my pmx840bt mixer come on but won't output any sound?
Please contact us through our email support system to assist you further with your concern. Simply go to pyleusa.com, click on the CONNECT tab, and then in the drop-down menu, choose Contact Us. Fill out the form, and in the last part, you will have the option to write your subject, and in the comment box, you can also write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800, ext. 2, during the weekdays from 9 am to 6 pm EST.
-
My pyle pmx840 800watt mixer ,was working and when I went to move it and now no sound everything is hooked up correctly power's on was playing music and when I moved it the sound went out ???
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Bluetooth is not connecting... how can I fix this?
Try to use different device to connect with the unit.
-
I have bought two of these from Amazon in the last three weeks and both of them have quit working. Power up fine ,but no output. Have you changed them,because I have used my original for karaoke for years. It finally shorted out.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
[PMX840BT] How would I connect this unit to a laptop for recording / web streaming purposes? In other words, what output would I use, and cable would I require to have? Thanks much. Eric
Please follow the steps below:
1. Connect your PMX840BT Via RCA out going to the LINE IN of your laptop or microphone slot. Its gonna be a RCA to 3.5mm cable.
2. Windows should automatically recognize your device as “JeiLi BR17” or as “USB Audio CODEC” – and it should automatically install any necessary drivers.
3. To manually change your PC’s default sound device, go to start, settings, and under System, Click Display, Sound Notification, and then click on Sound, and on the right, you will see a drop-down box for Output and Input. Simply choose your output device and your input device. Select the right external sound card, so it becomes your default preferred device for sound playback. You can do the same in the below section that reads sound recording, and in that dropdown menu, you can select your USB audio device. And now, your mixer should be the default input and output sound for your computer.
-
Can I use this amp with a cordless mic system like GTD UHF audio handheld wireless mic system
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Does this unit have phantom mic power to satisfy an AKG C 535 mic?
No, it doesn't have.
-
The echo function in my Pyle PMX840BT mixer is not working. How do I fix it?
If you have brought all Echo controls up and still no effect. It may need to be repaired