Marine Bluetooth Mp3 Radio Receiver
System Features:
- In-Dash Console Marine Stereo System
- Stereo Radio Receiver with AM/FM Radio
- Bluetooth Wireless Music Streaming
- Built-in Microphone for Hands-Free Talking
- USB Flash Drive & Micro SD Memory Card Readers
- Aux (3.5mm) Input Connector Jack
- Ability to Connect Additional External Devices
- (Smartphones, MP3 Players, Tablets)
- Rear RCA (L/R) Output Connector Jacks
- Illuminated Button Controls
- LCD Digital Display Panel
- ID3 Tag Song Readout Information: Name, Title & Artist
- Repeat/Random Music Functions
- Bass, Treble, Balance, Fader Adjustment
- EQ Audio Configuration
- Used for Automobile, Off-Road, Boat & Marine Watercraft
Bluetooth Receiver Connectivity:
- Built-in Bluetooth Wireless Music Streaming Receiver
- Integrated Front Panel Microphone for Hands-Free Calling
- Compatible with All of Your Favorite Bluetooth Devices
- (iPhone, Androids, Smartphones, iPad, Tablets, etc.)
- Bluetooth Version: 2.0
- Bluetooth Network Name: ‘Pyle’
- Wireless Range: 25’+ ft.
What’s in the Box:
- Bluetooth Marine Receiver
- Power & Wiring Harness
- Metal Chassis Frame Bracket
- Outer Trim Frame Cover
- Remote Control
Receiver Technical Specs:
- Single DIN Universal Standard Size
- Receiver MAX. Power: 300 Watt (75W x 4)
- Bluetooth Support: A2DP, AVRCP, HSP, HFP
- MPX/PLL Tuning Radio System
- S/N Ratio: >60dB
- Tone Controls: +/-10dB
- Stereo Separation: >45dB
- Receiver Current Drain: 15 Amp
- Digital Audio File Support: MP3, WMA
- Maximum USB/Micro SD Support Size: 32GB
- Frequency Response: 20-20kHz
- Power: DC 12V
- Receiver Chassis Dimensions: 178(W) x 108(D) x 50(H) mm
QUESTIONS & ANSWERS
Ask a Question-
Hello. I can't get this radio to turn on. Connected all wires from old radio connector to new harness. black to black, red to red, yellow to yellow blue to blue. Nothing happens. There is power on yellow for sure. suggestions?
There should be power on both RED and YELLOW wires
-
I only have 2 speakers on my motorcycle. I would use either the front or the rear speaker connections and tape off the unused?
That is fine. make sure to isolate the unused speaker wire leads
-
I do not want the clock to stay on and draw power in my boat - how do I defeat the clock and wire the PLRMR23BTW to just come on and off with the power switch but not draw while off? Thanks!
You can place a switch on the red wire and the yellow wire
-
Can I use this on a 24 volt system
No, you will need a stepdown converter.
https://www.amazon.com/Cllena-Converter-Regulator-Transformer-Waterproof/dp/B07B4HLLWJ/ref=sr_1_5?crid=1RWNQQV0TZ550&keywords=24%2Bto%2B12%2Bstep%2Bdown%2Bconverter&qid=1650971444&sprefix=24%2Bto%2B12%2Bstepdown%2Bconverter%2Caps%2C286&sr=8-5&th=1 -
I need the small remote for the PLRMR 23 BTW.
Please do not hesitate in contacting us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
For Parts Request Please Complete the information below:
Full Name:
Email Address:
Contact Number:
Model Number: PLRMR23BTW
Shipping address:
Requesting Part: PRTPLMRB29WRC -
Trying to replace my screen on my car radio pld 10 b 2 is the production number
Please send the unit in for repair
Please contact us through our email support system to assist you further. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST. -
What is the current draw when the unit is powered down? Is there a difference in the current draw (when the power switch on the unit is turned off) if the yellow and red wire both connected to +12 volts constant power verses the yellow being hooked to +12 volts constant power and the red hooked through the accessory switch on the ignition?
Yes, there is a difference, When the unit is off the active line is the yellow wire which draws minimal current to supports the system to keep the clock running and to hold the stored memory and system functions. Once turned ON the internal Amplifier will begin to work and that is the one that draws a high current to support audio.
-
What is the warranty
30 days Warranty for replacement from the seller and 1Year Repair and service warranty from the manufacturer.
-
is this unit water proof
I would say it is water-resistant but not totally water proof as there are ports that water may penetrate if it get soaking wet
-
I need an antenna for this unit. PLRMR23BTW Marine Stereo Receiver. Where can I find one?
Please check the link
-
Hello I have installed 2 different Pyle-PLRMR23BTW radios on my boat, I replaced another radio and put this radio in the boat the first time I changed it after hooking up power and ground wires only nothing came on so I returned the radio and picked up the same exact radio and re installed it but this time I double checked that maybe I might have made a mistake but since my background is in electricity and previous was in car audio I checked the voltage which is giving 13.66 volts on constant and 13.67 on switched. Is there anything else I should be doing to get this model to power up?
Have you got the Yellow wire to a constant +12 volts, Red on ACC +12 volts switched and Black to ground? These three-wires needs to be properly wired to get the radio to turn on
-
Unit installed OK but there is no sound from the speakers. I am not a novice at this... All wiring triple checked. Wired harness to two front channel Bose waterproof 4 ohm speakers. All the channels and modes seem to respond and the display appears to be getting a signal from local FM stations. I Secured the two Rear channel wires so they are not touching anything. It appears that the output amp section inside this unit is dead on arrival. This is a PLMRMR23BTW - PO44521190600867. Can you replace this defective unit.
Double-check the RED and YELLOW Wire make sure that they are both getting a +12volts
-
SPA Installation: If I have only a RED, could I wired the Yellow and the Red together ? I Tried only with the Red and no powering up... Thanks !
Yes you can combine the yellow and red
-
I only have two speakers on my boat, is it a problem to leave the unused speaker outputs unterminated? Or if they need to be terminated, how to do so without adding additional speakers? If not a problem, is it best to used front or rear connections or is it irrelevant?
Just make sure the unused wires are secured and not touching any other wires
-
unit is not powering up. We are getting power through negative side and positive side when we wire it up.
To power up the PLRMR23BTW you need to have the Yellow wire to be connected to the 12 volts with constant power and the RED wire to the 12 volts Ignition switch and the BLACK wire is the ground wire or the negative.
-
Good morning, we have had 2 of these radios for outside use. They worked for about 2 months then wnt haywire. They want to scan continuously and won't stay on. We still have them both. Bought one las fall and the secon one we bought this summer.
Make sure all power leads are properly connected
Make sure the antenna cable is securely plugged in
If you continue to have issues please contact support via email -
What is the difference between plrmr23btw and plmrkt38w?
plmrkt38w This is just the Radio
plmrkt38w This one comes with the speakers
-
What is the warranty on the marine bluetooth mp3 radio receiver?
One year manufacturer warranty for parts and services
-
the speakers play for like 5 minutes and then stop playing. they still get power when not playing. and also say its playing with no sound
Check all the wiring connection make sure there are no loose wires
-
Hola para envios a colombia que tiempo demora o como podria recibir acompalamiento para una compra!
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.