Wireless Bt Home/Pa Mixing Amplifier
Features:
- Bluetooth Wireless Streaming Ability
- Built-in USB Playback
- LED Display
- USB Flash Drive
- Aux Input
- MP3/MIC/AC-3 Inputs
- Digital LED Display
- Microphone 1 and 2 Level Gain and Talk-over Control
- Microphone 1 Priority function
- Mic Talk-over Ability to Speak Over Audio, Karaoke Style
- Desktop Home/PA Mixing Power Amplifier
- Compact Home Theater-Stereo Receiver Style
- Built-in Bluetooth for Wireless Music Streaming
- Optical/Coaxial Digital Signal Inputs
- Aux Audio Input Selection
- MP3/WAV Audio Files Support
- Connect & Stream Audio from External Devices
- Front Panel Audio Control Center
- Treble, Bass, Master & Microphone Volume Adjustable
Bluetooth Connectivity:
- Receives Wireless Signal for Audio Streaming
- Simple & Hassle-Free Pairing Setup
- Integrated Antenna for Extended Wireless Range
- Works with All of Today’s Latest Devices
- (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Version: 5.0
- Bluetooth Network Name: 'Pyle Speaker'
- Wireless Range: 40'+ Ft.
What's in the Box:
- Desktop Stereo Amplifier
- Remote Control
Technical Specs:
- Power Output: 500 Watts Peak Power
- Remote Control Battery: Need 2x ’AAA’ Battery (not included)
- MAX Power Output: 50 Watt x2(@ 4 Ohm)
- RMS Power Output: 35 Watt x 2 (@ 4 Ohm)
- Tone Control: Bass, f=100Hz +/-12dB, Treble, f=10 KHz +/-12dB
- Tone Control for Mic: Bass, f=100Hz +/-8dB, Treble, f=10 KHz +/-8dB
- Frequency Adjustment: +/-2dB
- Signal to Noise Ratio: >71dB
- T.H.D.: <1%
- Separation Degree: >45dB
- Radio Station Presets: Up to 40 Stations
- Power Supply: 120V/240V, Switchable
- Dimensions (L x W x H): 11.81'' x 9.45'' x 2.76'' -inches
QUESTIONS & ANSWERS
Ask a Question-
I got new PMX 3500PH and 4each JBL Pro Control1 150watts speaker, what is the correct way to connect my speakers to this amp to get the best result?
The PMX3500PH can accept 2 of the JBL Professional C1PRO On the 8Ohms Speaker terminal
-
Can you mount this unit in a standard 19" stereo rack?
Yes
-
How many 100watts rms horns can I connect to this amp before it kicks out?
to connect Multiple horn drivers use the 70 volts feature on the amp and the horn should also be 70 volts
-
Where can I get the remote control of this amplifier model? I lost my
Remote control for this unit is currently not available
-
Your specs contradict each other regarding the PMX3500PH. I am planning on using this as a 70volt system with 6 speakers. What is the actual output of this amp? There is a huge difference between 35 “RMS power”, 50 “Max power” and 500 “Peak power”. Is his actually a 50 watt amp or a 500 watt amp?
Sorry the RMS is 50Watts x 2 and the PMPO is 500 Watts
-
How soon can i get this
Estimated 5 to 7 Days
-
Does Mic 1 always take priority over music, or is there a way to make it take-over like Mic 2?
The Mic 1 always takes priority over music
-
how do I get a rack mount for this unit to fir a standard size av rack? 19in rack
It is hard to find a rack mount ear extension. What you can do is just fabricate a metal plate to extend the ears on both sides
-
Trying to appropriately size the quantity and wattage of speakers that can be used on the 70v channel wired parallel. What is the output wattage for the 70v channel? is it 50w?
@ 70V it is 500 Watts Peak Power
Divide the max watts by the number of speakers and you get the Watts tapping on the speakers
-
Is it possible to use individual Bluetooth connections (1 to 1) when multiple (2 or 4) PMX3500PH are in the same cabinet/rack? This would be to play separate audio to different zones.
Rename all 4 amps to identify which unit you are connecting to
-
Can I connect a turntable to this?
There is no Phono input
-
Two speaker outputs and a 70v output. Can you use both simultaneously. How much power to each?
Nop you have to choose which to use wether the standard 8 ohms or the 70v channel
-
You say it can be mounted into a 19" rack, but it is to narrow to connect both sides. How do you mount it without an adapter?
Not realy sure about the 19" Rack mounting. It was not mentioned in our website as well as with Amazons. the unit is not a 19" standard
-
Hello, I am looking for a mixer for Karaoke. Can this (PMX3500PH) be connected to a home theater system via a receiver? I have a 5.1 channel Bose home theater system that runs through a Yamaha HTR3067 receiver-thank you
The PMX3500PH is equiped with an optical input that you can connect yo TV's audio output to the mixer and it also has a dedicated Line outy to connect to asn external receiver.
-
How to program favorite FM stations
Press the mode button to it's corresponding input.
Once you have done scanning you can now search using the NEXT and PREVIOUS buttons to locate the station you want to listen to but you can not assign your favorite station. -
Could this mixer be paired with two Pyle Pro PPHP2888B units?
No, one should be a transmitter and/or a device that can read the BT signal of the PPHP288B.
-
hello, I am wonder if I buy this product PMX3500PH can I connect to tv via the optical input and have sound that I can mix it with input from microphones? Also what speakers do you recommend for it that are not too expensive and microphones?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I recently purchased this device through Amazon. I previously purchased a Pyle Pre-Amp PP444 and attached it to my Fluance turntable. The pre-amp currently connects directly to a pair of Kanto YU6 Powered Speakers. This set up works well and the sound is good (to my ears). I have connected the pre-amp into this Mixing Amplifier (at the AUX Input) and use the LIN Output to connect the RCA cables to my Kanto speakers. I am not getting any sound with this setup. I am purchasing a pair of WJSTN RCA to Flex Pin Banana Plug Adapter cables to connect the speaker output on this device (items 20 on the diagram of the back panel of this device). These adapters will connect to the RCA cables going to my speakers. Am I going the right direction? Or are my speakers incompatible with this device? Is my pre-amp incompatible? Eventually I would like to connect this device to a Sonos system and be able to use the Sonos speakers to transmit the music from my turntable throughout my house. I have been told, on another forum, that this device is compatible with a Sonos system.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I am experiencing feedback when using a push to talk microphone with the system. Do you sell a push 2 talk microphone that works well with the system? Is there a wiring diagram available for Mic 1 /Mic 2 circuit?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
How can I split the bass from the voice with this
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
hi i have 6 ceiling speakers . each require 100v . the system we have now kicks out every half an hour or so. can this unit handle these 6 100v speakers with ease ?
Each speaker has a selector knob to choose wattage. Each speaker should be arround 80 to 85 watts
-
The line out does not appear to have any output. Trying to run it into the AUX input of my bose wave radio. Something I need to setup special? Thank you.
The Line Out should send the signal to the input of your Bose Wave with no problem