Phono Turntable Pre-Amplifier
Features:
- Converts phono signals to line level signals
- Connects to turntable output bringing phono level up to line level
- State-of-the-art circuitry to accommodate magnetic pickups
- Ultra-low noise audio operation improves sound performance
- Universal compatibility: for turntables & other studio equipment
- RCA (L/R) Input & Output Connector Jacks
- 1/4'' Output Connector Jack
- *or battery operated via 9-Volt battery
What's in the Box:
- Turntable Pre-Amp
- Power Adapter
Technical Specs:
- S/N Ratio: 70dB
- THD: 0.08% @ 1kHz and 3mV
- Output: 2V max (P-P) at 10K Ohms
- Frequency Response: 20Hz to 20kHz @ 2dB
- Input Sensitivity: 3mV at 50K Ohms (Phono)
- Load Impedance: 10K Ohms - Reference Voltage: 1V d
- Battery Operated, Requires (1) x '9V' Battery, Not Included
- Dimensions (W x H x D): 3.54'' x 2.13'' X 1.02'' -inches
QUESTIONS & ANSWERS
Ask a Question-
Hello, is this unit has the option of a 9-volt battery and option for the plug?
Yes, this unit has the option of 9V battery and option of 12VDC plug, can by 12VDC plug, or 9V battery for power supply. The 9V battery power will be automatically disconnected when the 12VDC plug is inserted. The 9V battery will be powered when the 12VDC plug is unplugged.
-
I wonder the description below in your PP555 Q&A sheet. "Q:Does this unit provide for RIAA phono equalization? Did not see it in the spec sheet. Thanks. A:The unit is a basic Magnetic Turntable and does not have any preamp. Therefore there is no equalization." Is your P555 not "phone equalizer" or PP555 does not include RIAA curve ? Your clarification is very much appreciated. Thank you.
PP555 does not have RIAA
-
tried using a 3-way cable (w/video plug left unplugged) and does not work. do i need to use a 2-way plug only?
Red and White RCA with Ground wire
-
Good morning. I have a Pyle PP555 preamp, connected to my very vintage Technics SL-1950 turntable, and the very newish Yamaha RXa760 receiver. I'm getting a LOT of noise... perhaps static or hum. Can hardly hear the music. Anyway, what do you think may be the issue and the remedy? Thanks in advance. Preston
As per checking on the Yamaha receiver specs, this unit has its own phono preamp. Simply connect your turntable to the receiver and connect the ground to the ground screw and it is good to go.
-
What ports do I connect the PP555 output to on my receiver??
To any input on your reciver.
-
Does this unit provide for RIAA phono equalization? Did not see it in the spec sheet. Thanks.
The unit is a basic Magnetic Turntable and does not have any preamp. Therefore there is no equalization.
-
the unit stay on when i unplug it . do i have to remove 9v battery when not in use?
Yes you have to remove the battery when not in use
-
I just received a new one and the ground seems to keep needing to be reset. Any solutions before I give up and return it?
All need to do is tap the ground wire to the ground.
-
What is the differences between the Pyle PP555 and PP999?
the Pyle PP555 can run on 12V power or battery operated via 9-Volt battery plus an option to use a 1/4" connection for output
The PP999 does not have this feature -
Hi I bought a few years back and have to hook it back up . I can't find the maual and when I clicked here to download it says site can't be reached? Any thoughts? Thanks.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
My receiver has phono on back and my turn table has no built in amp how is connected maybe to aux?
using the phono preamp, yes Aux will be the right input