Wireless Bt Home Audio Amplifier
Features:
- 6-Ch. Stereo Amplifier System
- Bluetooth Wireless Audio Streaming Receiver
- FM Radio Tuner with Digital LCD Display
- Front Panel Button Control Center
- Audio Source Input Mode Selector
- Connect & Playback Audio from External Devices
- Headphone Jack with Independent Volume Control
- (2) 1/4'' Microphone Input Jacks
- Built-in Microphone Talk-Over Function (MIC1)
- MP3 Digital Audio File Support
- USB Flash Drive & SD Memory Card Readers
- USB Port Doubles as Device Charge Port
- Push-Type Speaker Connectors
- Aux (3.5mm) Input Jack
- REC + Subwoofer Output RCA (L/R) Connectors
- Audio Input RCA (L/R) Connectors
- Short Circuit & Over Voltage Protection
- Audio Configuration Settings: Treble, Bass, Master Volume, Echo, Mic Volume
- Convenient Audio Source Control for Home or Office Use
Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Bluetooth Devices
- (iPhone, Android, Smartphone, iPad Tablet PC, etc.)
- Bluetooth Network Name: ‘PYLEUSA’
- Bluetooth Version: 4.0
- Wireless Range: Up to 30’+ ft.
What’s In The Box:
- Stereo Amplifier System
- Remote Control
Technical Specs:
- Power Output: 750 Watt MAX
- Amplifier Design: 6-Channel
- Impedance: 4-8 Ohms
- Frequency Response: 20Hz - 20KHz
- Signal to Noise Ratio: >81dB
- T.H.D.: <0.3%
- Headphone Jack, 3.5mm
- Radio Station Memory: 30 Station Presets
- Digital File-type Compatibility: MP3, WMA
- Maximum USB/SD Flash Support: Up to 64GB
- Power Supply: 110/220V, Switchable
- Dimensions (L x W x H): 13.8'' x 7.8'' x 3.8'' -inches
QUESTIONS & ANSWERS
Ask a Question-
Will this item return to your store? I purchased it twice on Amazon and both times I had to return due being damaged in shipping. The item are being shipped in the original container void of any form of additional shipping protection. TIA - Kris
There is no advice from the warehouse when it will restock
-
How do I get the extra 3 months "extended" warranty? Got some Cards with Unit that say I get a free gift plus the extended, but when I use the QR code all it does is try to install a Messenger App on my phone!
if you are having trouble registering please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
What is the maximum number of speakers I may connect? Not counting the powered subwoofer. I notice speakers A-F (@6), top & L&R Channel, below. It appears that I may connect twelve (12) speakers. Please confirm if true and if not, then… Thanks
12) 8 ohms speakers
-
do i need to do something special/extra to get a usb flash drive to work with the pta62bt?
Make sure all files are in mp3 format and also the maximum flash drive capacity is 32GB
-
What mic works best with this unit?
https://pyleusa.com/products/pdmic59?variant=40212288995363
-
Which is the best way to connect this equipment with the equalizer PPEQ-100?
You can use RCA cables to connect the audio output of your source device (like a CD player, mixer, or media player) to the input jacks on the PPEQ-100 equalizer.
-
How do you search and set radio on PTA 62 BT
etting up FM:
Go to the far right side of the preamp and look for the selector knob. Choose USB/SD/FM/BT OR mp3.
Then press the mode button and look for FM.
Press the Play/Pause button to let it automatically scan all the strong signals it can pick up.
After having all station scanned and save, you can now search them by pressing the PREVIOUS and NEXT Buttons.
-
Why can't I get the remote to work the volume in aux mode
Use the 3.5mm AUX port in the front panel
the 2 AUX port at the back is only controled by the main volumes -
Is the subwoofer output for passive or powered speakers?
ACTIVE SUBWOOFER
-
I have just received my amplifier PTA62BT.5 from Amazon and im struggling to get the unit to read usb flash, I have formatted to ms dos fat32, I have tried different usb flash brands but still it doesn't read the usb flash im using 32gb ones
Iall has been done and still not reading check the warranty options
-
my pta62bt does not read the usb flash
File must be in an mp3 format
USB flash drive should be formated to FAT32 -
Is this amplifier can be used as preamplifier between pyle microphones and my sony 1000W receiver?
YES you can use the REC OUTPUT
-
Are your Pyle 6.5 ceiling speakers PDIC68FG a good match for this amp?
Yes but to let you know this speaker model is currently discontinued
-
How conect it whit speaker end Bluetooth
On the far right side turn the selector knob to BT/mp3 then look for the MODE button, press till it shows BT or Blue then start pairing.
For Speaker connection. use the Binding post at the back of the unit colored Black and RED. Unscrew the binding post and insert the speaker wires according to it color -
How conect Bluetooth
On the far right side turn the selector knob to BT/mp3 then look for the MODE button, press till it shows BT or Blue then start pairing.
-
If I run 4 wires out of each output to a Polk Atrium8 with 4 wire connections. Will the speaker play as a single stereo loudspeaker?
We don't recommend doing that as we are not familiar with the Atrium8 design
-
How can I get a replacement volume knob for this?
-
How do you set up 2 speakers for stereo?
These are Mono channels
-
Hi Dear I bought pyle PTA62BT and I live in Saudi Arabia the voltage here is 220v. Now the red button of voltage selector in the device has 110 and 220 v. But actually I don't know how to choose 220. So my question is When I see the 220v on the bottom that means it will work with 220v or 110v. Please support
If the unit has been purchased in the US. The voltage switch is defaulted to 110Volt.
Simply slide the switch to the other side to make it 220V
-
Referent to the speakers conection, I used 6 speakers celestion serie F15, power handling 100 w, 8 ohms and a active subwoofer Cervin Vega. Each Celestion speaker has have 4 plugs, two red and two black and a bridge. i put out the bridge and use a pair of dual cables and proceded to do exactly the same in the unit. I fill all the space for speakers, 4 single cables for each speaker. ¿The process is correct?
YES
-
How do you program the radio stations for a PTA62BT?
Go to the far right side of the preamp and look for the selector knob. Choose USB/SD/FM/BT.
Then press the mode button and look for FM.
Press the Play/Pause button to let it automatically scan all the strong signals it can pick up.
After having all station scanned and save, you can now search them by pressing the PREVIOUS and NEXT Buttons. -
i bought pyle Wireless Bt Home Audio Amplifier we dont use it very much, when we do the fm radio does not work not evan with the remote will not change the channels is there any kind of warranty or a place to send it for repair. i bought it in aug.18,2023 for $134.98
If the unit needs repair please contact us
https://pyleusa.com/pages/contact
-
What is the largest gauge speaker wire you can use on the PTA62BT?
That depends on the distance at which the speaker will be placed.
With 4-ohm speakers, you can run up to 24 feet on 16-AWG wire, and for runs up to 100 feet, 10 or 12-AWG wire is recommended.
If you are using 8-ohm speakers, 16 AWG wire is recommended for runs up to 48 feet and 10 or 12 AWG wire for runs up to 200 feet. -
Unable to get any FM radio stations. Can I use an outside FM antenna and if so how do I hook it up? I do not see any ports or connectors
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I need a manual for pmx3500ph so I can Bluetooth the system to my computer for sound
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I have been unable to connect my Bose Bluetooth Speaker to the Pyle Amplifier model# PTA66BT?
The connection requires to have a receiver and a transmitter. Bluetooth speakers are not compatible with the unit.
-
I have this amplyfier but no remote can i order one
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Is the output per channel in stereo or mono?
The output per channel is mono
-
What is the fuse specifed?
Fuse. T2.5AH/250V glass fuse
-
I want to buy this amplifier and coonect it with 8 speakers. What is the best option for speakers to combine with this amplifier?
The unit does have a 6ch speaker terminal or equivalent to 6pairs of passive speakers.
Do you literally have 8speakers or 8pairs to connect to the amplifier? -
i bought one of these and was wondering how do you set the radio pre sets? the manual that came with it does not explain very much. thanks adam
Set the selector knob on the far right of the receiver to MP3/BT. Once you have done that, press the mode button to select FM, and then you can press the play pause button to scan all radio stations. Once you have done scanning you can now search using the NEXT and PREVIOUS buttons to locate the station you want to listen to but you can not assign your favorite station
-
What is the difference between the PTA62BT and the PTA62BT.5?
There is no specific difference for both of the unit.
-
How do I format USB flash drive to play on pta62bt
You can format it using a computer.
-
Can any of the channels be bridged? If so, at what impedance?
No, this unit is not bridgeable.
-
Is the PTA62BT Amplifier 750 Watts per channel or that is the overall power?
That is the over all power of the unit.
-
How do you set fm stations and select fm stations for playback. The user guide is useless for this
Set the selector knob on the far right of the receiver to MP3/BT. Once you have done that, press the mode button to select FM, and then you can press the play pause button to scan all radio stations. Once you have done scanning you can now search using the NEXT and PREVIOUS buttons to locate the station you want to listen to but you can not assign your favorite station
-
is remote an rf or ir control
IR Control
-
How do I set a station preset once I’m tuned to the FM station I want?
SETTING UP FM RADIO
Set the selector knob on the far right of the receiver to BT, FM, USB. Once you have done that, press the mode button to select FM, and then you can press the play pause button to scan all radio stations. Once you have done scanning you can now search using the NEXT and PREVIOUS buttons to locate the station you want to listen to but you can not assign your favorite station -
I turned on my PTS62BT today for the first time. Bluetooth worked fine. Turned it off and when I turned it back on none of the mode display screen lights come on, it won’t change modes and Bluetooth doesn’t work. Suggestions?
Try using the remote to turn on the display screen