High Power Stereo Speaker Selector
Features:
- Multi-Channel High Powered Amplifier
- Up to 6 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Rugged & Durable Housing Construction, Cabinet Heatsink
- Control Powered 6 Channel Amplifier
- Plug and Play Easy Install
What's in the Box:
- High Power Stereo Speaker Selector
Technical Specs:
- Power Output: 6 x 100 Watts
- Amplifier Design: 6-Channel
- Minimum Impedance: 8 Ohms
- Frequency Response: 20Hz - 20KHz
- Signal to Noise Ratio: >81dB
- Channel Separation: 80 dB
- Crosstalk between Channels: 50 dB
- Speaker Terminal Wire Size: 14-22 gauge
- Max. Amplifier Input: 100W RMS, 150W AVG
- Max. Output per Speaker: 18W RMS, 50W AVG
- Product Dimension (L x W x H): 6.29'' x 16.92'' x 3.03'' -inches
This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
QUESTIONS & ANSWERS
Ask a Question-
In response to my previous question, you responded that the only difference between speaker Selectors PSPVC6 vs. PSLSW6 is that one uses "Phoenix connectors" and other uses "Binding Posts for Banana Plugs". That's what I originally thought. If that's the only difference, then - 1. Why PSPVC6 is advertised as “Pro, Premium, New and Improved, High Powered” where as PSLSW6 has none of these? 2. What is date of introduction of each of these two models? Again, Thank you. KS Taneja
Looking on our own website. there is none mentioned about the Premium New and Improved. We have escalated this to our listing department on Amazon to correct the information
-
Hell Iw as wondering if I am able to purchase some replacement connectors for my pspvc6. They got lost while moving. any help would be appreciated. thanks
-
Is there a recommended amp / receiver to use with the pspvc6
The recommended amp receiver for this unit should be at least 100watts per channel
-
Hi can you tell me if the PSPVC6 will drive 3 pairs of 8 ohm speaker at the same time with no impedance problems of one amplifier
Yes, the PSPVC6 will be able to drive all 3 pairs with no impedance problems
-
Do the 6 speaker inputs on this switch only accept bare wire or are there any plugs that will work with them?
Bare wires through the phoenix connectors