High Power Stereo Speaker Selector
Features:
- Multi-Channel High Powered Amplifier
- Up to 6 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Rugged & Durable Housing Construction, Cabinet Heatsink
- Control Powered 6 Channel Amplifier
- Plug and Play Easy Install
What's in the Box:
- High Power Stereo Speaker Selector
Technical Specs:
- Power Output: 6 x 100 Watts
- Amplifier Design: 6-Channel
- Minimum Impedance: 8 Ohms
- Frequency Response: 20Hz - 20KHz
- Signal to Noise Ratio: >81dB
- Channel Separation: 80 dB
- Crosstalk between Channels: 50 dB
- Speaker Terminal Wire Size: 14-22 gauge
- Max. Amplifier Input: 100W RMS, 150W AVG
- Max. Output per Speaker: 18W RMS, 50W AVG
- Product Dimension (L x W x H): 6.29'' x 16.92'' x 3.03'' -inches
QUESTIONS & ANSWERS
Ask a Question-
In response to my previous question, you responded that the only difference between speaker Selectors PSPVC6 vs. PSLSW6 is that one uses "Phoenix connectors" and other uses "Binding Posts for Banana Plugs". That's what I originally thought. If that's the only difference, then - 1. Why PSPVC6 is advertised as “Pro, Premium, New and Improved, High Powered” where as PSLSW6 has none of these? 2. What is date of introduction of each of these two models? Again, Thank you. KS Taneja
Looking on our own website. there is none mentioned about the Premium New and Improved. We have escalated this to our listing department on Amazon to correct the information
-
Hell Iw as wondering if I am able to purchase some replacement connectors for my pspvc6. They got lost while moving. any help would be appreciated. thanks
-
Is there a recommended amp / receiver to use with the pspvc6
The recommended amp receiver for this unit should be at least 100watts per channel
-
Hi can you tell me if the PSPVC6 will drive 3 pairs of 8 ohm speaker at the same time with no impedance problems of one amplifier
Yes, the PSPVC6 will be able to drive all 3 pairs with no impedance problems
-
Do the 6 speaker inputs on this switch only accept bare wire or are there any plugs that will work with them?
Bare wires through the phoenix connectors
-
If I have a 5.1 Yamaha AMP with 6 speaker outputs: one speaker wire output for each of front channel left and right speakers, rear channel left and right speakers, center channel and subwoofer. Will I be able to play and listen to all 6 speaker pairs at one time from the Yamaha Amp connected to AMP A inputs on the switch?
You can connect the front channels to the PSPVC6 and send distribution out to respective zone
-
Hi I just purchase PSPVC6 and PDA46BT how I can connect them together to work with ceiling speakers
Simply connect the Speaker out to the high-level input of the PSPVC6 and the output of the PSPVC6 to the ceiling speakers
-
I have the pspvc6. It uses 8 green wire connector plugs. I am in need of 4 of the green plugs. How do I order them?
You can find this on Amazon.
https://www.amazon.com/Parts-Express-Phoenix-Connector-4-Pole/dp/B00MJGPFWG/ref=sr_1_3?crid=1ZO0G8FITLA7G&dchild=1&keywords=phoenix+connector+4+pin&qid=1609197897&sprefix=Phoenix+conector%2Caps%2C378&sr=8-3 -
I have a Pioneer Elite SC-75 receiver. Will it work ?
Yes, It will work. The PSPVC6 has a Max Amplifier Input of 100W RMS, 150W AVG
-
What is the difference between the PSPVC6 and the PSLSW4 besides the speaker hookups?
PSLSW4 Is 4 channel selector with binding post speaker terminals
PSPVC6 is a 6 channel speaker selector with Phoenix connector for speaker terminal
-
This unit indicates: "Power Supply: 120/240V Voltage Selector." What does this refer to? The PSPVC6 that I received has no power input
This unit Does not require Power to operate
-
I have two sets of speakers. One set is A pair of JBL -100 with impedance of 4 ohms and another set of Klipsch Heresy with an impedance of 8 ohms. Can I use this switcher with these speakers?
The Minimum standard Impedance for this unit is: 8 Ohms
-
Hi, I spoke to B&H about a speaker selector switch she told me there was no such switch that I needed the Pyle PSPVC6 to use the same pair of speakers with 2 receivers/amps. I an trying to use my same Cerwin Vega speakers with my old great sounding Techniques receiver and not use my Yamaha A/V receiver that I use for video. I find the sound quality of my old Techniques receiver sounds better than running thru the Yamaha AV receiver but tired of switching speaker wires back and forth from receivers.
Sound quality depends on the the Preamp design and power capacity
-
can you order the connector for hooking up speakers.
https://www.amazon.com/kuosbiu-Terminal-Connector-Pluggable-Connector-Phoenix/dp/B0CM3YKD3M/ref=sr_1_6?crid=24H8UFFLUQJ0I&dib=eyJ2IjoiMSJ9.InEe8i7-ONDsNJo85RGUgUrCx8zZheJLBVF1AhAv-A1KO3Io5qVdcPmWJ3S3L5KPgkDWkEubpkhLH1YDzV9f0UWYRyG9Qc-m10J6WXN6vTKZJBOGG_BBX-MqGcz3Yw6rna98KFw8qvEgCXnRAOrU0Pvj1zLt3y8_ubaWq5KafvTmUkBtr6ik-YkVodiJjlvAc2O8ny-bjjeYItNxCLr8SjV0iXA7OneQgcCPuXWF5CE.74-obaUa_6yb1VQcwXW-I2JOx0Fi1T2GWDgGjN8z2ms&dib_tag=se&keywords=4+pin+phoenix+connector&qid=1730333224&sprefix=4+PIN+phoenix%2Caps%2C357&sr=8-6
-
What is the difference between the PSPVC6 and the PSPVC6.5
Specification wise there is no change but internal minor upgrades of semicondutors and capacitors.
-
Does this product provide gain, or does it only output the power level input to it. Thanks.
it only output the power level input to it
-
What is the difference between the PSPVC6 6 channel high powered selector that plugs into a 120 v outlet & the PSLSW6 6 channel selector that has not power plug in? I want to hook them up to my B channel on a Yamaha Receiver for speakers in other rooms in my house. The A channel on the Yamaha is a 6.1 surround sound for my TV. Thank you
The difference is the Speaker connection type. PSPVC6 uses Phoenix Connector while the PSLSW6 uses Binding post