Home Theater Stereo Receiver System
QUESTIONS & ANSWERS
Ask a Question-
How do I get the remote control
The remote control for the PT260A is currently not available
-
The radio will not tune beyond 99.9. The instructions does not say if it should.
Please check if the antenna is wired properly. It should go up beyond that frequency
-
can i connect a subwoofer to this receiver
There is no subwoofer out on the unit
-
can this connect to my phonograph?
No it will require a phono preamp
-
I bought a Pyle PTA 260 and I can't figure out how to hook it up to the television. Please help.
You will need a digital to analog converter to connect to the receiver
-
can i buy just buy the remote for pt260a ?
the remote control for the PT260A is currently not available
-
what is the input impedance for FM antenna?
75 Ohms
-
My PT260A always powers up at full volume, even though it was set at level #6 or #8 when turned off. Also, the EQ/Level Meter appears to be flashing randomly, rather than really displaying any actual information. Are these normal operations for this model?
Powers up at a loud volume are something that is not normal. There may be a problem with the unit and the EQ/Level Meter only flashes randomly it does not display an actual reading.
-
I have no sound
Check the wiring and input source as well as the mode selection if it is on the right mode setting.
-
on the PT1100 1000watt power amp, is it possible to connect a subwoofer, even though there seems to be no specific outlet for, it on the back . A couple of people on the internet said they did, but did not specify how. Thanks, Brian at btim@shaw.ca
You can connect through the REC LINE OUT
-
How many watts at 4 ohm two channels
100W x 2 @ 4 Ohm
-
How do you get the memory to hold. I can't get it to work.
Try searching for station and press memory and then the number location you want on the remote
-
Which input do I use to connect my phone into? Aux or mp3. Neither are working
Any of the 3 inputs at the back of the unit. iPod / MP3, AUX or CD / DVD using an RCA to 3.5 Cable.
-
Where is this receiver manufactured?
China is still the leading exporter of parts and electronics to the United States. China accounts for over 80% of electronic parts exports. They are, nevertheless, closely regulated for US quality requirements.
-
Is it safe to use a 200watt sub woorfer 4ohm with my Pyle PT260A 200watt 4-16ohm receiver .
The PT260A does not have a Subwoofer output and it can only drive a full range speaker
-
Can I get this system to work without a Remote ?
Yes you can
-
How do you raise or lower the light levels on the DB panel and volume level meter... Mine is so low I can't see them.... Thanks
The system does nmot have controls for the back light
-
How do I switch between speakers output A&B?
There is no option to select from Speaker A to B