Bluetooth Home Audio Source Amplifier
Features:
- 6-Channel Amplifier System
- Compact Desktop Audio Receiver Design
- Built-in Bluetooth for Wireless Audio Streaming
- FM Radio Tuner with Digital LED Display
- Front Panel Button Control Center
- Audio Source Input Mode Selector
- Connect & Playback Audio from External Devices
- MP3 Digital Audio File Support
- USB Flash Drive & SD Memory Card Readers
- (2) 1/4'' Microphone Input Jacks
- Built-in Microphone Talk-Over Function (MIC1 Only)
- Push-Type Speaker Connectors
- Aux (3.5mm) Input Jack
- Audio Input RCA (L/R) Connectors
- REC + Subwoofer Output RCA (L/R) Connectors
- Headphone Jack with Independent Volume Control
- Short Circuit & Over Voltage Protection
- Audio Configuration Settings: Treble, Bass, Master Volume, Echo, Mic Volume, Mic Tone
- Convenient Audio Source Control for Home or Office Use
Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Bluetooth Devices
- (iPhone, Android, Smartphone, iPad Tablet PC, etc.)
- Bluetooth Network Name: PYLEUSA
- Bluetooth Version: 4.0
- Wireless Range: Up to 40’+ ft.
What’s In The Box:
- Audio Amplifier
- Remote Control
- FM Antenna
Technical Specs:
- Power Output: 600 Watt MAX
- Amplifier Design: 6-Channel
- Impedance: 4-8 Ohms
- Frequency Response: 20Hz-20kHz
- Signal to Noise Ratio: >81dB
- T.H.D.: <0.3%
- Radio Station Memory: 30 Station Presets
- Digital File-type Compatibility: MP3, WAV
- Maximum USB/SD Flash Support: Up to 32GB
- Remote Control Battery: (1) x ‘CR-2025’ Button Cell (Included)
- Power Cable Length: 4.2’ ft.
- Power Supply: 120/240V, Switchable
- Dimensions (L x W x H): 16.9’’ x 9.84’’ x 3.54’’ –inches
QUESTIONS & ANSWERS
Ask a Question-
I have the PTA66BT, recently purchased. The Subwoofer connection on the back, is that for active or passive subwoofers?
Active Subwoofer
-
Is stereo sound possible? Why are there 2 sets of speaker outputs per channel?
These are mono channels only
-
I have connected everything and there is no sound
Please check the selector knob if it is set to the right mod
-
Can you run a turntable through it?
You will need a phono preamp to connect a turntable to it
-
I have an Acoustic Research mobile outdoor speaker that accepts an RCA line input to wireless transceiver. I hooked it up to an RCA output on my PTA66BT. Sometimes it works and sometimes it doesnt (transceiver light signals that a line input is functioning and the remote speaker plays what is on the PTA66BT). The Transceiver works fine when connected to my mobile phone (transceiver light comes on). How do I know that the RCA outputs on my Pyle are working? In other words, what volume control & knobs have to be in what position for the RCA output connections to be working? Does the RCA signal work in combination with one of the volume buttons?
RCA Line out is a constant audio output. Please check which audio source is selected
-
Is this amp bridgable? Namely wanting to get maximum wattage out to two speakers.
This is not bridgeable
-
how to set fm stations as preset
Set the selector knob on the far right of the receiver to MP3. Once you have done that, press the mode button to select FM, and then you can press the play pause button to scan all radio stations. Once you have done scanning you can now search using the NEXT and PREVIOUS buttons to locate the station you want to listen to but you can not assign your favorite station
-
Does the remote control volume?
The remote control can only access Bluetooth, FM radio, USB/SD mp3 Volume. But the master volume also needs to be up.AUX, CD, and DVD input does not have access to the remote control
-
I can connect to my Pyle PTA66BT receiver via iPhone but no sounds comes out at all. I have it selected and shows Bluetooth on the screen. Sound so turned up and connections are fine. It works for the record player. I have tried a few different devices and same result.
Please check your warranty options if you have done Trouble shooting and nothing happens
-
I would like to order 6 indoor/outdoor speakers with this, which speakers are recommended for watt and sounds
https://www.amazon.com/Dual-Waterproof-Outdoor-Speaker-System/dp/B000NJHAEM/ref=sr_1_1?crid=1EGLKH51YZML5&dib=eyJ2IjoiMSJ9.WHkybdQ2UaD8BygwF1f3sDDkbXbqya4GLXk5bxzCDIuIJ4TqF2ssmW4ZpCWZScADt70eOwL1mjtOZzZErRlUb3twXD79xfe5__KWJq34pgRQcg157x9thPEHsYLOA162PpdpJXSgQFYUCzNVttctROHbcBrxSOG1tsjQQ8SDtPp340PSE3xcNpRZn2bHpVrzr_Eds7UdkM3zUqfQcHU0XZVciMfTifETqlMruW5NeUQ.ql8UQYqrSYis0KkccHuqlZ6f2EfL5kk7bXHQXX8Q6zU&dib_tag=se&keywords=pyle%2Bwall%2Bmounted%2Bspeaker&qid=1730879415&sprefix=pyle%2Bwall%2Bmounted%2Bspeaker%2Caps%2C323&sr=8-1&th=1
-
the sound coming out is too low. What is the solution?
Check the source if it also have a volume. make sure it is set to max so you have full control on the volume
-
If stereo sound is put in is it just mono that comes out the output. In other words does it play stereo mode.
It is MONO a combined Left and Right signal in one
-
Just received this,,are there radio station presets?
TO SET THE RADIO STATION
Go to the far right side of the preamp and look for the selector knob. Choose MP3.
Then press the mode button and look for FM.
Press the Play/Pause button to let it automatically scan all the strong signals it can pick up.
After having all station scanned and save, you can now search them by pressing the PREVIOUS and NEXT Buttons. -
Setting fm stations?
Make sure the FM antenna is connected.
Setting up FM:
Go to the far right side of the amplifier and look for the selector knob. Choose mp3.
Then press the mode button and look for FM Radio.
Press the Play/Pause button to let it automatically scan all the strong signals it can pick up.
After having all station scanned and save, you can now search them by pressing the PREVIOUS and NEXT Buttons. -
What is the RMS wattage output per channel? what is the warranty period?
Approximately 60Watts per channel
-
The volume is low
Check the source volume Ex. Phone, Tablet, & PC
Check remote control Volume if it is on max
Check multiple devices if volume is consistenly low.
For further assistance please contact customer service -
Hello, I would like to know the weight of this pta66bt amplifier.
Weight: 13.42 lbs.
-
Is there a wireless microphone compatible with this model?
https://pyleusa.com/products/pdwm3375
-
1.) How many speakers can be connected to this model and at what rated wattage should the speakers be? 2.) If I have the maximum number of speakers attached, can I control the volume of speakers in certain areas? ie. restaurant dining room and patio?
Eache channel can accomodate (2) Two 8 ohms rated speaker and is controllable by one volume knob each channel. Meaning you can have a maximum of 12 speakers all together thaty can be assigned to 6 different locations.
-
It doesn't connect with Bluetooth
Remove all the Bluetooth history from the device connected and try to use different device for the unit.
-
Does Pyle at any point plan to add Network Receivers, i.e. an amplifier with WiFi ability, Or LAN ethernet port to facilitate streaming music by WiFi?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
How do you preset the FM stations on the PylePTA66BT amplifier?
Press the MODE button on the front panel or the remote control until FM appears on the display.
Press the TUNING +/- buttons to tune to your desired station. You can also press the AUTO button to scan and store the available stations automatically.
Press and hold the MEMORY button for three seconds. The display will show a preset number and flash.
Press the PRESET +/- buttons to select the preset number you want to assign to the station.
Press the MEMORY button again to confirm and store the station.
You can repeat these steps for other stations you want to preset. To recall a preset station, press the PRESET +/- buttons or use the numeric buttons on the remote control. -
How do I get a manual for the PTA66BT model?
Please see the link provided.
manuals.pyleusa.com/PDF/PTA66BT.pdf -
Hi is the subwoofer out line pre amp ?
Yes,