8-Ch. Bluetooth Powered Pro Audio Mixer
Features:
- 8-Ch. Audio Mixer System
- Pro Audio Stage Powered Design
- Bluetooth Wireless Music Streaming
- Digital LCD Display
- Front Panel Audio Control Center
- Connect & Stream Audio from External Devices
- MP3 Digital Audio File Support
- USB Flash Drive & SD Memory Card Readers
- Aux (3.5mm) Input Jack
- 3-Pin Low Impedance Balanced Microphone Inputs
- 1/4'' Line/ High Impedance Balanced Inputs
- Headphone Output: 1/4'' TRS Stereo Connector
- RCA & 1/4'' Effects Loop Connectors
- Additional RCA Inputs: Tape Play (L/R), Tape Record (L/R)
- Master 5 Band Graphic Equalizer
- Independent Channel Volume, EQ & EFFX Adjustment
- EQ & Master EFFX Control of Level, Echo & Reverb Controls
- Convenient Carry Handle
- Built-in Cooling Fan
Bluetooth Connectivity:
- Built-in Bluetooth for Wireless Music Streaming
- Simple & Hassle-Free Pairing
- Works with All of Today's Latest Devices
- (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Wireless Network Name: ‘AC46XX’
- Bluetooth Version: 2.1+EDR
- Wireless Range: 30’+ ft.
What's in the Box:
- 8-Ch. Bluetooth Stage Powered Mixer
- Power Cable
Technical Specs:
- Power Output: 800 Watt MAX
- 8 Ohm Impedance Each Channel
- Line Level Impedance 10K Ohms @ -10dBv
- Mono Microphone Inputs (XENYX Mic Pre-Amp)
- XLR: Electronically Balanced Discrete Input Circuit
- Frequency Response: <10Hz–150kHz (-1dB), <10Hz–200kHz (-3dB)
- Gain Range: +10 - +60dB
- Max. Input Level: +12dBu @ +10dB Gain
- Impedance: Approx. 2.6k Ω Balanced
- Signal-to-Noise Ratio: 110dB / 112dB, A–Weighted
- Distortion: (THD+N): 0.005% / 0.004%, A-Weighted
- Channel Equalization: Control Range
- High @ 10K +/-15dB, Low @ 60K +/-15dB
- Master EQ Frequency Hz: 60, 250, 1K, 4K, 12K
- Boost/Cut Control: +/-12dB
- Effects Loop & Send: 1/4'' TS Connectors Unbalanced
- Impedance: Approx 1k Ohm -10dBv
QUESTIONS & ANSWERS
Ask a Question-
Can I use the 1/4" microphone cord on this Pyle PMX840BT audio mixer? For some reason I cannot get any sound out of the microphones and I was wondering if the 1/4" cord might be the problem. I put the gain up on each mic and the master, but I got nothing. Do you have any idea what the problem might be?
The microphone connector is the XLR to XLR. 1/4" is for Line level input only
-
Does this run off a 120 Volt household outlet.
Yes
-
Im looking to power 4) : MTX TP1200 speakers in a Gym. Woofer 12" Sensitivity 92dB (2.83V/1m) Impedance 4Ω RMS Power (Watts) 150W will this do the job? loud gym and need big power and loud volume
We recommend P3001BT to power the 4 MTX TP1200
-
what is the rms
400Wats RMS
-
How do I get warnty for my mixer. It's only a couple weeks old and burnt up
Please do not hesitate in contacting us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.