Handheld Dynamic Microphone
Features:
- Built-in Acoustic Pop Filter
- Ultra-Wide Frequency Response
- High Signal Output for Vocals & Singing
- Rugged Construction & Steel Mesh Grill
- Integrated Low Noise Circuitry
- ON/OFF Switch for Stage Control
- Includes: 6.5' ft. XLR to 1/4'' Audio Connection Cable
- Perfect for Stage Performances or In-Studio Use
Technical Specs:
- Mic Element/Type: Dynamic
- Pickup/Polar Pattern: Uni-Directional
- Mic Body Material: Plastic
- Frequency Response: 50Hz-15KHz
- 600 Ohm Output Impedance (+/-)30%
- Microphone Sensitivity: -54db (+/-)3db(0dB=1V/Pa @ 1KHz)
- Microphone Dimensions: Φ6.77'' x 1.65''
QUESTIONS & ANSWERS
Ask a Question-
Is this considered a low impedance mic? I ask because I have Rockville RPM48S amp/mixer that I want to plug this into. Each of channels 1-3 have both a 1/4" TS input for hi-impedance mics or other devices, and an XLR input is marked for low impedance mic and other devices. The box for this mic says it's a 300 Ohms output - though somewhere else I read it was 600 - but whatever the case, do I need to buy an adapter to plug this into the XLR input, or buy a new cable w/XLRs at both ends for this mic to use it with this amp for best results? And somehow I bought 2 of these mics, so I'm also deciding whether or not to keep both if I'd be better off with a different setup all together. Thanks!
You can get an XLR to XLR cable for best results
-
Where can I purchase a microphone pdmik1 near zip code 18350? Thank you.
-
I was supposed to receive this as a free gift with my purchase and it never came. Im a faithful long term customer and i'd enjoy for a representative to call me at 443-979-5448 at the earliest convenience please and thank you.
Please contact us through our email support system so we can assist you further. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
How do I claim my reward (PDMIK1) that I qualified for?
Please contact us through our email support system so we can direct you to the proper department. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
do i get the pdmlk1 mike as rewardgift
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I purchased a power supply on amazon lately and was supposed to received a microphone after registering the product but microphone received up to the time of writing this. This is misleading!
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
when will you have the PDMIK1 back in stock?
We do not have the specific timeframe when the unit will be available.
Please see the link for other mic reference.
https://pyleusa.com/products/pdmic59