Compact Audio Mixer Pro Audio Interface
Features:
- Rugged, Metal Chassis & Exquisite Panel on 2 Sides
- Preset 16 Digital Effects
- Built-in SUB Output, EQ Control for MP3 Player
- Can Choose 6 Kinds of Sound Effects Normal/ Rock/ POP/ Classical/ Jazz/ Country)
- Flexible Connectivity for a Variety of External Devices
- Ultra-Low Noise Design with High Headroom
- Integrated Sound Card for Computer Recording Support
- USB Interface: Connect to Mac / PC
- Smooth Rotary-Style Faders for Mic/USB/Line/Master Controls
- Extremely Musical 2-Band EQ & Pan, on Each Channel
- Combo Microphone Jack Connector – XLR and 6.35 Jack
- 4 XLR+6.35 JACK (L/R) Stereo Input and Output Connectors
- Voice Echo Effect/Delay Features
- Audio Signal CLIP LED Indicator Lights
- Input Selection / Control Buttons
- Independent Channel + MASTER Volume Controls
- Independent Channel Balance/High + Low-Frequency Adjustment
- Universal Digital Audio File Compatibility
What’s in the Box:
- Mixer Interface
- USB Cable
- Wall Adapter
Technical Specs:
- Power Supply: DC 5V/1A
- Phantom Power: +48V
- T.H.D.: ≤0.5%@+4dBμ
- USB Interface: SB 2.0, Windows 98SE+, Macc OS
- Power Supply: USB, DC 5V/1A
- Dimensions (L x W x H): 11.22’’ x 9.06’’ x 2.17’’ –inches
What’s in the Box:
QUESTIONS & ANSWERS
Ask a Question-
Will this audio mixer work to use multiple microphones and then use to feed the sound through a laptop into a Zoom meeting? I don't know much about mixers and being able to connect them to a computer. I am needing to be able to use multiple microphones at the same time in a Zoom meeting. If this doesn't work, can you recommend what I should look for? Thank you, Jay Stafford
This unit has 4 mic inputs and can be connected via USB to your laptop and link to a Zoom software for meetings
-
I need help getting the Bluetooth function to work on my pmx466. can you help?
We've checked on our listing and the unit seems to be not advertised as having a Bluetooth feature. However, can you try to press the mode button and see if you can find BT on the selection? If you find BT you can try to start pairing your device
-
Can this mixer power passive speakers. If I use an amp the levels are all clipped. Do I not need an amp
PMX466 mixer (assuming you meant this or a similar small analog mixer model) does not have a built-in power amplifier. That means:
-
It cannot power passive speakers on its own.
-
You do need an external amplifier if you're using passive speakers.
-
If your levels are clipping after adding an amp, it's likely due to gain staging or mismatched signal levels, not because the amp is unnecessary.
Let's break this down:
1. Mixer + Passive Speakers (No Amp) = Not Gonna Work
-
Passive speakers require power to move their drivers.
-
A mixer like the PMX466 only outputs line-level signals.
-
You must have a power amplifier between the mixer and passive speakers.
2. You're Using an Amp, But Getting Clipping
Clipping usually means:
-
The signal going into the amp is too hot (too loud).
-
The gain structure isn’t set properly.
Fixing the Clipping:
Here’s a quick checklist:
-
Set mixer output levels properly:
-
Make sure your channel gains and main output faders aren’t maxed out.
-
Use the level meters (if any) and aim for average levels around 0 dB (unity gain), with peaks not going into the red.
-
-
Check the amp’s input sensitivity:
-
Many amps let you adjust this—try reducing it so the amp doesn’t get overloaded.
-
If you’re going from a line-level mixer into a consumer-level amp, the signal might be too hot.
-
-
Use balanced cables (XLR or TRS) from mixer to amp if possible to reduce noise and interference.
-
Consider a speaker management processor or limiter between mixer and amp to prevent overdriving.
-
-
We are a small ensemble that will be singing and playing her instruments against the backing track that's on her laptop. Can we connect our PC and have the backing track play through the mixer to our speakers along with our vocals and instruments that would be using the XLR cables?
Possible
-
I have a pmx466 mixer and it is registered under oliverfrancisco137@gmail.com It doesn't work at all And some of the knobs were broken
Please write us an email regarding this and provide a proof of purchase