Waterproof Rated Off-Road Speakers
Features:
- Pro Audio PowerSport Speakers with RGB Lights
- Amplified (Active) Speaker System
- Bluetooth Wireless Music Streaming Ability
- Bridged Sound System: (2) x 5.25'' Woofers + (2) x 1'' Tweeters
- Marine Grade Waterproof Rated Construction
- Weatherproof & Water-Resistant Housing
- 2-Way Full Range Stereo Sound Reproduction
- Built-in Digital Sound Processing Amplifier
- Integrated Speaker Power & Wiring Harness
- Compact Size & High-Powered Output
- Impressive Bass Response
- Aux (3.5mm) Input Jack
- Connect & Stream Audio from External Devices
- Sleek Design, Machine Molded Speaker Cabinet Housing
- Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
- Used for Off-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
Bluetooth Connectivity:
- Simple & Hassle-Free Pairing
- Instant Wireless Audio Streaming Ability
- Works with All of Today’s Latest Devices
- Smartphones, Tablets, Laptops, etc.
- Bluetooth Version: V5.0
- Bluetooth Network Name: ‘PyleUSA’
- Wireless Range: 30+ ft.
- *Bluetooth Receiver Module Built-Into Amplifier of Main / Active Speaker
What’s in the Box:
- (1) 5.25'' Amplified Main Speaker
- (1) 5.25'' Passive Support Speaker
- Speaker Connection Wires, 6.6' ft.
- (2) Butt Connectors, 16-22 AWG
- (2) 1.75” Aluminum Mounting Brackets
- (2) 2” Aluminum Mounting Brackets
- (2) 6.5” x 0.95” x 0.67”Inches Rubber Pads
- (2) 5.7” x 0.95” x 0.67”Inches Rubber Pads
- (2) 6x50mm Hexagon Socket Head Cap Screws
- (2) Stainless Steel Nuts
- RGB Connection Wire, 6.6’ ft.
- Remote Control
Technical Specs:
- Speaker Power: 1000 Watt MAX
- Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
- Amp Type: 2-Channel, Class D
- Marine Grade Waterproof Rating: IP-X5
- Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
- Tweeter Type: Neodymium Dome (x2)
- Impedance: 4 Ohm
- Magnet Type: 24 oz. Circuit
- Mid-Woofer Voice Coil Type: 1'', Aluminum
- Sensitivity: 88 dB +/- 2 dB @ 1M/1W
- Anti-Thump Turn-On
- Soft Turn On/Off
- T.H.D: <0.05%
- S/N Ratio: >80dB
- Channel Separation: >65dB
- Amp Freq. Response: 20Hz-20 kHz
- Fuse: 1 x 15A
- Power Supply: DC 12V
- Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.75’’ ~ 2.0’’ –inches
- Speaker Dimensions: 6.5’’ x 7.1’’ x 9.5’’ -inches, with Bracket (-Each)
QUESTIONS & ANSWERS
Ask a Question-
I know it comes with built in AMPs and you do not have to use another amp, but can you run the PLMTR4A with it? Also can it be direct wired instead of just bluetooth?
The PLUTV55BTR is a stand-alone speaker system
-
How are these speakers powered? Or do you gotta charge them?
These are powered by 12V. These are not rechargeable
-
Can I pair these with my Pyle soundbar
No, as they are both receivers
-
Do they automatically turn off or are they on all the time ????
It turns on once the ignition key is turned on
-
is there any way to wire these to a radio unit to make it part of the automotive system?
These speakers are stand-alone as they are already amplified
-
How to I connect a amp to these
These speakers are Bluetooth enabled and is already amplified. there is no need for amplifiers
-
Do I need to go directly to the battery or can I put in a relay? And how do I connect to the Bluetooth on the speakers?
You can place a tougle switch on the positive side to turn off power to the speaker
-
Do you guys sell just the remote for these speakers? We lost ours and really would like another remote.
We currently don't have the exact remote for this model
We only have for PLUTV45BTR.
https://pyleusa.com/products/prtplutv45rc?variant=40212361576483
-
Hi, I have the pyle plutv55btr, I was wondering if you guys sell the power cord that connects to the non powered speaker to light the lights up.. this unit didn't come with that cord
Please contact the reseller of your unit and check the warranty for the unit.