High Power Stereo Speaker Selector
Features:
- Multi-Channel High Powered Amplifier
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Rugged & Durable Housing Construction, Cabinet Heatsink
- Control Powered 6 Channel Amplifier
- Plug and Play Easy Install
- Up To 8 Separate Speakers Pair To Your Stereo System.
- Accepts Speaker Wires Up To 14-Gauge.
- Handles 100 Watts Per Channel With Speaker Systems That Have A Minimum
- Protection Circuitry Keeps It Running Smoothly
What's in the Box:
- Power Stereo Speaker Selector
Technical Specs:
- Power Output:8 x 25 Watts
- Minimum Impedance: 4 Ohms
- Frequency Response: 20Hz - 20KHz
- Speaker Terminal Wire Size: 14-22 gauge
- Max. Amplifier Input: 100W RMS, 150W AVG
- Max. Output per Speaker: 18W RMS, 50W AVG
- Dimensions 12.8'' X 2.04'' X 6.12'' -inches
QUESTIONS & ANSWERS
Ask a Question-
What does the PROTECTION button do? When should it be used/not used?
If you are using more than 2 sets of speakers you need to use the impedance protection button
-
What if I run a 120 w amp thru this ? Thanks
Yes it will still handle it but no more than that
-
Hi . can I use this to connect 8 amplifiers then switch between them to set of speakers as long as I don't urn on 2 amplifiers at the same time? Thanks
The PSS8 is a speaker distribution. only need one receiver amplifier
-
I had asked for a detailed connection drawing for a 7.2-channel AV receiver and was provided this response "Use the Front Left & Right to connect with the speaker selector From the speaker selector A chnnel will be your front. B, C, D, and so forth will be yor distribution Pyle USA" So I have to ask does the surround sound effects, subwoofer etc all go through the front left and right connection? Or do you loose the surround sound effects when essentially running all the speakers through the front left and right?
The speaker selector is a speaker distribution system only and not a suround system. You still have the suround effect on the AV receiver you are using
-
can you provide a detailed wiring diagram when used with a Denon AVR-S940H is a 7.2-channel AV receiver. It looks like there are only 2 input connections R and L So this would only control whatever is coming from the "front R and L" of the 7.2 Channel speaker?
Use the Front Left & Right to connect with the speaker selector
From the speaker selector A chnnel will be your front.
B, C, D, and so forth will be yor distribution