Marine Speakers Waterproof 200W Stainless Steel LED Lights Silver

I own the speakers 5.25'' LED Wakeboard Tower Speakers PLMRWB50L but the mounting clamps are broken and am trying to locate 2 360 degree mounting clamps, are they available?

The mounting clamps only come with the unit. They bare not available for parts

I bought a open box speakers PLMRWB50L there's no instructions. I have 4 wires blue white black and red which go where ?

Red and Black wire are For power and the White and Blue are for the connecting active and passive speaker

How are the LED powered? What needs to be wired to make them work? or are they on Batteries

there are two cables per speaker. one to power the LED Lights and one for the speakers

Whats largest size bar will the clamp attach too?

Mounting hole dimension

Minimum Pole size 1"
Max Pole size 2.5

Do they include the wiring kit or is it a seperate purchase? And what kit is suggested?

The connectors are not shown on the listing and on the manual:

Please do not hesitate in contacting us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject and also on the comment box you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back with you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

What is the wattage of the LED lights?

There is no specification about the wattage of the LED but for sure it is a very low consuming LED

are these speakers 200 watts each or 100 watts per speaker

The PLMRW50L is a 100 Watts Max per speaker.

Are the speakers self powered or do you need an amplifier or receiver to power them

The PLMRWB50L speakers are not self-powered. They are passive marine speakers, so they require an external amplifier or receiver to operate. You’ll need to connect them to a compatible 4–8 ohm amplifier (like a marine head unit or power amp) to drive them properly.

how do rotate the brackets

The PLMRWB50L mounting brackets can be rotated by loosening the mounting screws on the sides of the speaker. Once the screws are loosened slightly, you can adjust the speaker angle and rotate it to the desired position, then retighten the screws to secure it.

If the bracket does not rotate freely, avoid forcing it. Some installations may require removing the speaker from the bracket first and repositioning the bracket before reattaching the speaker.

Can I use these speakers without an amp and stereo . Can I just run them off my phone after they are hooked up .

These are passive speaker which require to use an amplifier

I just bought these speakers . They say they are blue tooth , do I need an amp and stereo to run . Or can I pair them with my phone ?

It require to use an amplifier

How to Bluetooth a plmrwb50l

Use 

https://pyleusa.com/products/plrdn43

What powers the led lights I know white and blue for led what do hook them to?

The LED will change its light or will lit up once connected to a constant power supply.

What size speaker wire are these using

14 AWG speaker wires