Laptop Projector Stand - Adjustable Height, Durable Metal, Portable

I lost the screw that tightens the legs. Is there a replacement part or what is the part number?

We currently have no stock of the leg screw.  You can try looking it up on Amazon.

Hi. Just curious what size are the screws and wing nuts. One of mine seems to have gone missing

We do not have the specification of the screws and wing nuts

I just ordered the PLPTS3 and it didn't come with the mounting clamps, wing nuts, washers and plate bolts. Is there any way that you guys can send them to me or I can order them ASAP?

Please contact us through our email support system to assist you further. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

Can i get a replacement screw that tightens the legs when they are extended?

https://www.amazon.ca/Pyle-Pro-PDBC10-Outlet-Supply-Center/dp/B0037GPLOE/ref=sr_1_3?crid=362RWGHYACRSU&keywords=PDBC10&qid=1642034442&sprefix=pdbc10%2Caps%2C276&sr=8-3

The thumb screw that tighten the height adjustment has stripped out, is there a replacement The thumb screw that tightens the height bar has stripped and no longer allows me to extent the height of the table. Is there a replacement or can you furnish the size of the screw?

For the PLPTS3 projector/laptop stand, Pyle does not normally sell the thumb screw/height-lock knob as a standalone listed retail part.

What you can do instead is replace it with a standard M8 threaded hand-tightening knob (thumb screw), which is what most of these tripod-style stands use for the center column lock.

What is the maximum weight the product can support? What are the dimensions of the product when it's folded for storage?

For the Pyle PLPTS3, here are the verified specs:

The maximum weight load capacity is 40 lbs (about 18 kg).

That’s the safe working limit for the laptop tray and is what you should stay under for stability (especially if it’s extended at full height).

Where is the Universal Laptop / Device stand made?

China is still the leading exporter of parts and electronics to the United States. China accounts for over 80% of electronic parts exports. They are, nevertheless, closely regulated for US quality requirements.

PYLE-PRO Universal Laptop Projector Tripod Stand 14” x 11” Plate Size PLPTS2. Lost wingnuts and washers that held the plate to the tripod. Went to Lowes and found these for replacements. Wingnuts: Hillman 127089 Metric Zinc size M6-1.00 Washers: Hillman 490687 Flat washers Zinc, 1/4 In. Screws: Flat Head size M6 3/4" Please give these to the people who have been asking.

Sure thing. Thanks

How much weight will this support? PLPTS3

The weight capacity of the PLPTS3 is not explicitly stated however, users have reported that it can hold up to 15 lbs (6.8 kg) of weight.

Do you make an accessory that converts the laptop stand into a music stand?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

For the laptop stands, model PLPTS2, PLPTS3 and PLPTS4 are the tripod legs all the same length? Just trying to determine if one might be more stable than the others. Thank you

The tripod legs are not all the same length. The PLPTS2 has an adjustable height range of 22.0'' - 35.0'' -inches, the PLPTS3 has a range of 28.0'' - 50.0'' -inches, and the PLPTS4 has a range of 29.0’’ - 52.0’’ -inches

What weight does the PLPTS3 support?

The weight capacity of the PLPTS3 is not explicitly stated by the manufacturer, but some users have reported that it can hold up to 15 lbs (6.8 kg) of weight.
However, this may vary depending on the size and shape of the device, the angle and height of the tray, and the stability of the surface. Therefore, it is advisable to use caution and test the stand before placing your device on it.

I lost the rubber cover of the leg that touches the floor. How can I get it?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

In re your Universal Laptop / Device Stand PLPTS3, I take it that the table, aka "Device Resting Plate", itself is what weights 4 pounds, BUT what is the weight of the assembled metal tripod?

The weight of the assembled metal tripod is 10.58 lbs

What is the weight limit of the Device Stand PLPTS3?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.

Hi on UK websites the hieght is given as up to 41" https://www.amazon.co.uk/PLPTS3-Adjustable-Laptop-Projector-Equipment/dp/B003GEKXRM?th=1 but your site says 50". Please confirm which is correct (or if you have diffferent specification in Europe)

the correct height is 28.0'' - 50.0'' -inches