4-Ch. Elite Bluetooth Marine Amplifier
Features:
- 4-Channel Amp System
- Built-in Bluetooth Receiver for Wireless Music Streaming
- Dual MOSFET Power Supply
- Marine Grade Construction
- Water Resistant & Weatherproof
- Dual Adjustable Input GAIN Level Controls
- Dual High Level Speaker Input Connectors
- Dual RCA (L/R) Input Connector Jacks
- Silver-Plated Speaker Output Terminal Connectors
- Adjustable Input GAIN Level Control
- Anti-Thump Delay Circuitry
- Built-in Thermal, Overload & Speaker Short Protection
- Heavy Duty Aluminum Alloy Heatsink
- Power ON LED Indicator
- Remote Turn ON/OFF
Bluetooth Connectivity:
- Smart Auto Connect: Remembers Device Pairing Info
- Compatible with All of Your Favorite Bluetooth Devices
- (iPhone, Androids, Smartphones, iPad, Tablets, etc.)
- Bluetooth Network Name: ‘Pyle Amp’
- Bluetooth Version: 2.1
- Wireless Audio Range: 25’+ ft.
Technical Specs:
- Output Power: 100 Watt x 4 MAX
- Amplifier Class: AB
- Marine Grade Rating: IP-01
- Input Gain Impedance Adjustment: 1 - 300mV
- Frequency Response: 15Hz - 30kHz +/-3dB
- Input Impedance: 10k Ohms (Low), 100 Ohm (High)
- Input Sensitivity: 250mV (Low), 2.5V (High)
- T.H.D.: <0.04%
- S/N Ratio: 95dB
- Fuse Type: 20A
- Power Supply: DC 12V
- Matching Speaker Impedance: 4-8 Ohms
- Dimensions (L x W x H): 8.0'' x 7.9'' x 2.0''
QUESTIONS & ANSWERS
Ask a Question-
Can I hook the Plmra410bt to a golf cart that has a 48 volt system without a reduced?
-
How do I connect my phone to this
Just have the unit powered on and it is ready to pair
-
How do I bridge a woofer on channels 3 & 4 on a plmra410bt?
This amplifier is not bridgeable
-
Can I use this amp as a stand alone without a receiver?
Yes, since it has Bluetooth capability.
-
When I connected the PLMRA410BT to my battery the power light does not light up and I do not see the bluetooth connection either.
Have you checked the fuse.
Check power connection. see to it that the REM tetminal has 12V as well -
can only get one speaker out put from amp.plmra400. Wiring is all good to high input terminals and still have only 1 channel! All 4 channels work fine without amp installed. please help, thank you
If all connectin are good and power supply is ok then it may be a problem with the amp it self. Check your Warranty
-
Just bought the PLMRA410BT from Amazon Seems to be missing some wiring and mounting parts . Trying not to return it if you can supply replacements .
Accessories are currently not available
-
Can I use a 12vdc power supply instead of a battery to power the PLMRA410BT amplifier. I want to use it in my pool area b
Yes
-
Can I use a 120vac to 12vdc power supply with this amp.
-
Dear Sir. I would like to use this amplifier to power two (2) front speaker and one (1) subwoofer. Please let me know whether it is possible to use bridged ch1&2 or ch3&4, if yes, how to connect subwoofer? Best regards
This amp is not bridgeable check te link for recommendation
https://pyleusa.com/products/plmra430bt -
My power where you hook it up the side of the plastic is broke haven't even hooked it up yet just noticed it well that cause I taped it up real good will that cause it to have a red light
As long as there is no wire shorting with the metal chassi it should be fine. The red light is the power indicator
-
what Size fuse Does IT take ?
20Amperes Blade fuse
-
I bought this amp and wired it correctly but I still have a red light the manual say that I should have a green light
Try to rewire the unit and check the power supply if it is constant 12V.
-
Amp shuts off at 13.9 volts. Comes back on when shut motor off.
Remove all the wiring connections made with the unit and have it all connected and make sure to check its polarity and also check for power supply where the unit is connected.