8-Ch Bluetooth Studio Pro Audio Dj Mixer
Features:
- DJ & Studio Console Mixer System
- Multi 8-Channel Audio Source Mixing
- Built-in Bluetooth Wireless Receiver
- FX (Analog Effects) & 16 Bit DSP processor
- Direct-to-Computer Connect & Sound Record Ability
- 7-Band EQ
- 32-Bit Dual Engine DSP
- 24-Bit ADC DAC Converter
- FX Configuration Adjustment Controls
- Rotary Adjustment Knobs & LED Indicator Lights
- MP3 Digital Audio File Compatibility
- USB Flash Drive Reader
- USB Port for Desktop Connection
- Connect & Stream Audio from External Devices
- (2) 1/4’’ (L/R) MAIN Outputs
- (4) XLR/14’’ Combo Audio LINE/Microphone Inputs
- (2) Pair RCA (L/R) Inputs
- (2) Pair 1/4’’ Mono + Stereo Inputs
- 1/4’’ Send + Return Inputs
- 1/4’’ Headphone Jack
- Stereo Level Fader/Slider
- Output Signal Level Indication
- BUS Audio Control, Sound Routing
- PAD Channel Source Input Switch
- Independent Channel Input Audio Configuration
- Gain, High, Mid, Low, FX/Send, Level, Base + Tone Adjustment
- +48V Phantom Power Control
- Power ON/OFF Switch
- Used for Professional Studio Applications & On-Stage Performances
What’s in the Box:
- Bluetooth Studio Mixer
- Power Adapter Cable, 3-Pin
Wireless Bluetooth Connectivity:
- Hassle-Free Audio Streaming Ability
- Works with All of Today’s Latest Devices
- (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Network Name: ‘KG-08A’
- Bluetooth Version: 2.0
- Wireless Range: 15+’ ft
Technical Specs:
- Input Mixer Channels: 8-Ch. (+ FX/Headphones)
- Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm
- Input Frequency Response: 20Hz-20kHz, +/-3dB
- Input Distortion: 0.03%, 1kHz/150mV Input
- Channel GAIN Adjustment: +20/+64 (-6/+38)
- HIGH Gain: +/-15 dB, 12kHz Frequency Shelving
- MID Gain: +/-15 dB, 2.5kHz Frequency Shelving
- LOW Gain: +/-15 dB, 80kHz Frequency Shelving
- HIGH/MID/LOW Adjustment: -15/+15dB
- Stereo Output Level Meter: 12-Segment (-30, -20, -10, -7, -4, -2, 0, +2, +4, +7, +10, CLIP)
- PAD Input Channel Adjustment: 26dB
- Peak CLIP Level: < 3dB
- Digital Audio File Compatibility File-Types: MP3, MP4, WMA, WAV
- Phantom Power Voltage: +48V
- Power Supply: 100/240V (+/-15V DC Power Adapter)
- Dimensions (L x W x H): 16.3’’ x 12.5’’ x 3.66’’ -inches
QUESTIONS & ANSWERS
Ask a Question-
Is there a manual for this? Thanks
PMXU46BT - PMXU67BT - PMXU88BT - PMXU128BT converted to curves (pyleusa.com)
-
Is there a Monitor Channel/Out? Or would the Sub Channel work for that?
You can use the Sub out for monitor. However, you may need to use an external graphic equalizer to cut feedback frequencies
-
Looking for a power supply module for PMXU88BT
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
How long is the warranty and what does it cover?
Our manufacturer warranty is one year from the time of purchase
-
How do i get the mixer controls that are displayed on my screen when I plug into the USB to minimize? I cant move them, minimize them or use them. is there a patch for the driver? Is there a technical manual I can refer to?
The PMXU88BT has 2 tracks out and a 2 tack in only
-
Does the mixer have a crossover for sub out ? or do I have to use a separate crossover after mixer sub out ?
No, it does not have a crossover. It is just a dedicated output for the subwoofer
-
Does this mixer have a USB out so I can connect it to my computer so that Zoom can see it and choose it as the audio to stream?
Yes, it has a USB
-
Hello! I have the bluetooth connected but there is no sound playing. I'm positive that it's connected and the music is playing. I also went through and adjusted every knob and different combination still with no luck. Any insight would be greatly appreciated!
If you have the mixer set to Bluetooth ad confirm the connection. The input volume will be the MP3 slider, have it set to " Zero (o) db" and the Main Left & Right volume slider to Zero (0) db as well.
Main Output XLR should be securely connected to an active speaker or an amplifier with speakers
-
why only one channel working on this mixer
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
I want to connect my Pyle Pro pmxu88bt to Cakewalk I have connected via BT and usb to my Alienware Desktop computer I also have an external soundblaster XG5 an I am having problems recording to Cakewalk
PMXU88BT only needs to be connected via USB
-
Is there any way to adjust input volume to the MP3 recorder? I love this unit, but I am having a problem where every time I record the recording is blown out. It sounds fine through the speakers, and levels on the EQ seem fine. Any advice?
Adjust the volume of the main out slider of the mixer.
-
How to eliminate white noise form this unit?
What specific noise is that with the unit?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
What is the bluetooth device's name? Why can I not see it or connect to it? Do I need to update via a computer? Thanks!
Check for the Bluetooth Network Name: ‘KG-08A’
-
I am wondering if this would work for live social media broadcast? Example: I plug my guitar and mic into pyle mixer, then go from Pyle mixer to iPad to broadcast Facebook live? And, can I monitor with Bluetooth headphones? I currently use a small mixer designed for this that uses a wire plug from it directly to iPad but monitoring is difficult as there’s no Bluetooth way to monitor. Thank you.
Bluetooth headphone will not work on the mixer. Only the guitar, mic and iPad will work directly from the USB using USB to lighting cord.