6-Ch Bluetooth Pro Audio Dj Sound Mixer
Features:
- DJ & Studio Console Mixer System
- Multi 6-Channel Audio Source Mixing
- Built-in Bluetooth Wireless Receiver
- FX (Analog Effects) & 16 Bit DSP processor
- Direct-to-Computer Connect & Sound Record Ability
- LCD Digital Display & Front Panel Control Center
- Rotary Adjustment Knobs & LED Indicator Lights
- MP3 Digital Audio File Compatibility
- USB Interface: MP3 Flash Drive Reader/Computer Connection
- Connect & Stream Audio from External Devices
- (2) 1/4’’ (L/R) MAIN Outputs
- (4) XLR/14’’ Combo Audio LINE/Microphone Inputs
- 1/4’’ Mono + Stereo Inputs
- 1/4’’ Send + Return Inputs
- 1/4’’ Headphone Jack
- Stereo Level Fader/Slider
- Output Signal Level Indication
- BUS Audio Control, Sound Routing
- PAD Channel Source Input Switch
- Independent Channel Input Audio Configuration
- Gain, High, Mid, Low, FX/Send, Level, Base + Tone Adjustment
- +48V Phantom Power Control
- Power ON/OFF Switch
- Used for Professional Studio Applications & On-Stage Performances
What’s in the Box:
- Bluetooth Studio Mixer
- Power Adapter Cable, 4-Pin
Wireless Bluetooth Connectivity:
- Hassle-Free Audio Streaming Ability
- Works with All of Today’s Latest Devices
- (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Network Name: ‘KT-08UP’
- Bluetooth Version: 4.0
- Wireless Range: 15’+ ft.
Technical Specs:
- Input Mixer Channels: 6-Ch. (+ FX/Headphones)
- Mic Input: Sensitivity/Impedance: 1.5mV/750 Ohm
- Input Frequency Response: 20Hz-20kHz, +/-3dB
- Input Distortion: 0.03%, 1kHz/150mV Input
- Channel GAIN Adjustment: +20/+64 (-6/+38)
- HIGH Gain: +/-15 dB, 12kHz Frequency Shelving
- MID Gain: +/-15 dB, 2.5kHz Frequency Shelving
- LOW Gain: +/-15 dB, 80kHz Frequency Shelving
- HIGH/MID/LOW Adjustment: -15/+15dB
- Stereo Output Level Meter: 5-Segment (+6, +3, 0, -3, -10dB)
- PAD Input Channel Adjustment: 26dB
- Peak CLIP Level: < 3dB
- Phantom Power Voltage: +48V
- Power Supply: 100/240V (+/-15V DC Power Adapter)
- Digital Audio File Compatibility File-Types: MP3, WAV
- Dimensions (L x W x H): 9.3’’ x 9.7’’ x 2.6’’
QUESTIONS & ANSWERS
Ask a Question-
I am running OSX Monterey, and the OS makes a sound when I connect the mixer but it does not show up as a MIDI device. How do I download the driver?
If it does not run automatically. Try to manually activate by going to the sound setting and look for JeiLi BR17 as the external sound card. Choose this as the default Input / Output device
-
Why do the audio levels not register on the gauge? The power lights are on, but the lights above those two do not come on unless I bang the mic really hard. It would be helpful if it was far more sensitive.
Are the gain levels properly set to 11 - 12 O'clock?
Set all EQ knobs to 12"Oclock
input volume to a desired level -
I received my mixer today but I do not know how to install it
To assist you better with your concern about the mixer. Please contact us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
How can I get this mixer to work in Linux? My Linux distro is MX Linux 21, Debian based distro running Debian 11. If you need more system information, I will answer any questions. I have a Blue Snowball USB microphone that is currently working for my podcasting and vo work, without any issues at all. However, when I try to use my other 3 XLR Condenser microphones connected through a PMXU63BT mixer, to the USB cable connecting to the PC. I know that the mixer is working fine because it will work on Windows 10. I need to get this working asap under Linux because I am never going back to Windows.
Try going through the audio settings on your PC to manually sync the mixer to PC. Look for Jieli Br17 and set it as you default input and output device
-
How many headphone ohms does this mixer work with?
The headphone impedance is not found in our documentation