Pro Audio Hybrid Amplifier Receiver P3201BT
What’s in the Box:
Extend Warranty Protection and Earn Rewards. Click HERE for Registration
QUESTIONS & ANSWERSAsk a Question
how many watts per channel is this says 450 @4 ohm is that per channel or divide by 2
225 Watts x 2 @ 4 Ohms
can you advise of other units that can connect to a PC speaker output and also via BT?
PC can be easily connected via AUX inputs of any amplifier and most of the the amps are now equipped with Bluetooth
My P3201BT is connecting to my LG cinebeam PF50KG via Bluetooth but no sound is coming out. I have tried to disconnect and connect again multiple times. The LG cinebeam works very well with other Bluetooth devices. Can you please advise of a solution?
Can you try to connect other device to the P3201BT
I bought this unit but there are no instructions on how to program the FM Radio. Please let me know how to program this remote in detail. I'm not good with electronics so please in detail thanks
Set the selector knob on the far right of the receiver to MP3/BT. Once you have done that, press the mode button to select FM, and then you can press the play pause button to scan all radio stations. Once you have done scanning you can now search using the NEXT and PREVIOUS buttons to locate the station you want to listen to but you can not assign your favorite station
My remote doesn't do anything. New batteries... Just received the amp brand new. ??
please coordinate with the seller to get a replacement
Is this unit bridgeable with an Adcom Preamplifier
This is not bridgeable
Concerning the P3201BT. I have two speaker built into our living room ceiling and two built into to the ceiling of our screened in patio/lanie. My question is can I use this unit to play, for example, just the speakers in the living room without the sending music to the the patio and vise versa. Thanks,
The speaker channel is not switchable
Why is it the remote cannot change volume on Aux 1-3? I have tried purchasing 2 systems - both systems have the same issue
The remote can only control Bluetooth, USB/SD, FM Radio
I have purchased two of these receivers and the equalizer buttons on both units (both receiver and remote) does not allow user to toggle between Hall, Jazz, Rock, Pop, Normal. What am I doing wrong, IF ANYTHING?
When the button for EQ is pressed it should switch to different EQ settings
Will rf-63 Klipsch speakers work with this
Yes it will work
How many channels is this not counting the sub out ?
What is the approximate range of Bluetooth connectivity?
Wireless Range: 40’+ ft
Amp will go in a large Workout Gym facility and will power 4 speakers (2-R 2-L) and two subwoofers. Have had problems with WiFi connectivity drop out with my old Industrial amp which is only 250W. Will this one work better? iPhone no more than 75 wide open feet from amp.
The P3201BT does not have WIFI connectivity. it only has Bluetooth
Disk not installed
Please do not hesitate in contacting us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
Can I plug my tv out to aux input 2 or 3 on back of amp so tv will play through it? It is not working
If you have an RCA audio output from the TV. Yes, you can.
What kind of jack do I use for the sub output and what kind of jack do I use for the speakers
The cable needed for Subwoofer is an RCA to RCA male connector and the subwoofer needed to be used is an Active or powered Subwoofer
howTo get eq to work ,won't on remote or on console
EQ is actually just a preset. Ex. Rock, Jazz, POP, Classical, Or Flat
I have five wired speakers in various rooms, can I hook up these speakers, in bundles of four wires each, to this receiver; or do I need a speaker selector box with it?
If it is 5 Pairs you can use the PSLSW6
How to connect to bose solo 5 power speaker
The P3201BT is not equipped with digital audio input to be linked with the bose solo 5
Hello. I am in need of an amp to power a second set of speakers. I currently have a Kenmore KR-A5060 receiver and have run Bose 4.2 Series II 75 watt per channel off of them for twenty years. I just picked up a pair of Infinity Reference Five 25 to 200 watt per channel and want to be able to listen to all four at once, but my receiver keeps kicking out. Would this Pyle P3201BT be what I need to power this additional sound?
Yes this will do
Hello, please in specification tell CD player, but in what parts is, I don't see any in this model. I'm very interesting to buy it. Thanks
You can connect a CD player on any of the AUX inputs
how many bluetooth speakers will this drive
This will not work on Bluetooth speakers as both of them are transmitter.
After using this amp for about a week, I suddenly lost output. Input is BT and I verified it with a BT speaker. Amp says connected. Going to a hardwired speaker system throughout the home. Even tried switching the speaker wires between left and right jacks to no effect. I am not an expert on this so I don't know where to look next.
Make sure that the input selector knob has been selected the BT at the far right corner knob of the unit. And press the mode button, then locate the BLUE mode.
Also, try to use different speaker wires to the unit or change the speakers if necesarry.
Can you tell me the specific antenna connector used for the Bluetooth antenna?
Greetings Pyle Team: I am Kristophr Ryan, Music Producer for Rihanna. I have two of these they Are great however I need more outputs. What do recommend with at least 3000 Watts, and has more output options.
Thank you for your interest in upgrading your receiver. However, we still don't have anything that has more power than the P3201BT