Bluetooth Stereo Amplifier Receiver PDA9HBU
What’s In The Box:
Extend Warranty Protection and Earn Rewards. Click HERE for Registration
QUESTIONS & ANSWERSAsk a Question
having trouble to adjust volume with the remote control, in my PDA9HBU with optical input. Can do it with the main knob, but the unit will not respond to a remote control. what's the setup and procedure for that? thank you
The remote control volume works only on mp3, Bluetooth, FM Radio, and USB/SD. Providing also that the main volume is up.
Wich power (watts) is recommended for speakers?
the PDA9HBU has a maximum of 100 watts per channel
What are the controls set to on this amplifier unit in order to input HDMI from a Sony Bravia TV into the amp to spread to various speakers?
The PDA9HBU is not equipped with HDMI ARC
Can I go from my Vizio TV to the HDMI in and then out of the amp to regular speakers?. I am trying to get sound from the TV to regular speakers by going through the amp. Should I be using the optical from the tv to the amp? Thanks
It is better to use the Optical output from the TV. Go to the sound settings of the TV choose PCM then digital audio out and choose optical as your default audio out. On the amp just set it to Digital the hit the mode to look for optical
Does the hdmi input transfer to output to a tv? Video and sound?
HOW TO CONNECT HMDI FROM LAPTOP TO PDA9HBU AND OUT TO TV , I DID BUT NO SOUND FROM THIS UNIT
HDMI OUT from Laptop to HDMI IN of PDA9HBU
HDMI OUT of the PDA9HBU to HDMI IN of the TV
I'm having trouble with my amp. Up until today. it was working fine. Now, when you turn it on and play from a Bluetooth connected phone, the sound from the speakers is extremely faint. I thought that maybe it has been turned down on the remote, but it was still in the package with the battery not connected. The LCD screen on the front is on, but the power LED indicator is not. The LED on the volume control dial is also not working. Any suggestions?
Please do not hesitate in contacting us through our email support system. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
I've just hooked up a new PDA9HBU. It's connected to a pair of Dual LU43PB speakers. The sound from every source I've tried (phono, BT, and FM) is very tinny. Is there something I can do? There's no headphone jack, so I can't check it that way.
For Phono, please make sure that you are switched to Phono mode. For the FM and Bluetooth mode, there is a volume control on the remote, make sure to set it to max and adjust the master volume
Is there a workaround on this for 2 zones. Outside patio and inside tv room?
You can use PSPVC4 for multi Zone
Hello, doing some research on HDMI audio. I have a 65 inch Vizio TV, it has all the latest digital audio output and so on. I have it setup on HDMI (Audio E-ARC). and it's plugged into my Samsung soundbar, has wireless woofer, and back small shelf wireless speakers. Will the PDA9HBU Amp help boost my soundbar speakers and the rest? Can I use the HDMI EARC from the TV into the HDMI in on this amp and then the HDMI out to the input of my soundbar? Or does the HDMI in/out on this amp still need speakers hooked up to the amp also? Thanks
The PDA9HBU uses a regular HDMI pass-through. You can connect the TV using the optical Digital out going to the PDA9HBU and keep the HDMI connected to the Sound Bar.
PDA9HBU requires to have its own passive speakers wired to the speaker terminals at the back of the unit.
why does it indicate 200 watts when max output is indicated to be 25 W max?
It was actually RMS @ 4ohms