Professional Dynamic Handheld Microphone
Features:
- Built-in Acoustic Pop Filter
- Ultra-Wide Frequency Response
- High Signal Output for Vocals & Singing
- Rugged Construction & Steel Mesh Grill
- Integrated Low Noise Circuitry
- Includes: 15' ft. XLR to 1/4'' Audio Connection Cable
- Perfect for Stage Performances or In-Studio Use
Technical Specs:
- Mic Element/Type: Dynamic
- Pickup/Polar Pattern: Uni-Directional
- Mic Body Material: Zinc Alloy Metal
- Frequency Response: 50Hz-15KHz
- 600 Ohm Output Impedance (+/-)30%
- Microphone Sensitivity: -54dB (+/-)3db(0dB=1V/Pa @ 1KHz)
- Dimensions: Φ1.24'' x 6.14''
QUESTIONS & ANSWERS
Ask a Question-
Do you ship to Canada?
There is an option to choose Canada as the destination country
-
I see we can order the PRT254.6 Replacement. Will this wired mic work with the PWMA230BT Speaker or is there a headset mic that is compatable?
The wired mic will work for the PWMA230BT
You may want to check this out> PDWMU114
-
Does the PDMIC78 work with the PSBT65A? Does it have an on-off switch?
Yes it will
-
Do you ship to Brazil, Campinas SP?
We do not ship to Brazil
-
how to use this mic with a laptop without any audio interface?
Use a USB sound card to plug the mic into the computer
-
The PDMIC78 needs a Phantom Power (48v) to work perfectly?
It does not need a phantom power since it is a Dynamic microphone
-
Is there a windscreen available for the Pyle PDMIC78
There is no Windscreen available for the PDMIC78
-
Só vende pela Amazon? É que não estou conseguindo concluir .
It is available on this site as well:
https://www.bhphotovideo.com/c/product/853209-REG/pyle_pro_pdmic78_professional_moving_coil.html
And on our site:
https://pyleusa.com/products/pdmic78?_pos=1&_sid=5a189eff7&_ss=r -
what replacement mics are compatible with pwm a230bt loudpeakers?
https://pyleusa.com/products/prt254-6?variant=40279316365347
-
What kind of batteries does it require?
It does not require battery as it is a dynamic microphone
-
Hi, I use the PDMIC78 once a week when I host trivia. It stopped working. I bought on Amazon in April 2023 and I didn’t purchase extended warranty. I checked the XLR cable and that works with a different microphone. I was wondering if there was trouble shooting? Or next steps?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Drummers hit snare mics and mics also get dropped. Is there a replacement Grill for the Pyle Pro PDMIC78?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Will this mic fit a portable unit PPHP1049KT? Our mic broke and we’re trying to find a replacement.
This is doable, however, the unit requires an XLR microphone as you cannot achieve the full potential of the microphone output using the PDMIC78.
-
do i need a high impedance cable to use this microphone? thank you
Cable that needs to be used depends on the type of preamp being used or the mixer. But this type of microphones are best using XLR to XLR cable