Vhf 2-Ch. Wireless Microphone System Kit
Features:
- VHF Narrow Band Receiver
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Volume Control Indicators and Status Signals
- Audio Output Jacks
- Dual Independent Channel Antennas
- RF Signal and AF Signal LED Indicators
- Radio Frequency and Audio Frequency
What's in the Box:
- Receiver Base
- Wireless Handheld Microphone
- Headset Microphone
- Lavalier Microphone
- Beltpack Transmitter
- 1/4'' Audio Connection Cable
- (4) 'AA' Batteries
Transmitter Specifications:
- RF Power Output: >13dBm
- Harmonic at higher Degree: <60dB
- Modulation Degree: >30KHz
- Modulation Pattern: FM
- Power Current: <110mA
- Battery Type: DC 3V
Receiver Specifications:
- Sensitivity: -95dBm (S/N:12dB)
- S/N Ratio: >70dB
- RF Image Rejection:-75dB
- Neighboring Channel / Interference: >70dB
- Audio Dynamic Range:95dB
- T.H.D: <1%
- Operating Range: >50 meters
- Power Source: AC 120V / 60Hz
- Dimensions: 12.7” x 8.5” x 1.9” -inches
QUESTIONS & ANSWERS
Ask a Question-
What can I do to get rid of the buzzing/static when recording?
Check the signal cable if it is good.
check or replace the power cable
-
Why ate there no instructions??? For the amount paid for this you’d think there would be at least one sheet or paper or even a webpage to tell you how to make it all work!! I’ll be returning this product ASAP!
The unit is an easy to use Mic system simply place the batteries on the microphones and power up the receiver and connect the unit to a Kareoke system using a 1/4" to 1/4" cable via the Mic input. or XLR to 1/4" or you can also connect to an Amplifier mixer via the Mic input and it is ready to go!
-
Do you sell a microphone that can be used on channel 2 instead of the head/lapel mics if so desired?
No we don't sell a mic for the channel 2
-
I just bought this PDWM2115. I am trying to connect this to a stereo receiver to connect to the audio input. Does the PDWM2115 need an amplifier or any other part? Thank you, Wade Lokka
You may need a Mic Mixer
-
Does the belt back transmitter need to be used with each of the micphones? Can only one be used at a time? I would think there was a information sheet at least since there is no manual available.
You ca use the handheld microphone at the same time with the beltpack transmitter
-
I need instructions on how to use product. How do I plug into my Video Camcorder to receive sound from it? Do I need to order more cords or a external speaker? I don’t know how to connect this to my cannon XA15 video camcorder. Please help me.
There is an output at the back of the receiver using a 1/4" jack. you ca connect to your Camcorder
-
Hello, my receiver has something wrong with it. Makes a buzzing noise when turning up volume on mixer. Also transmitter seem to be intermittent send the sound from headset mic. Can I return the one I have and get one that works? Thanks
Please check if you are still within the 30 days return window from seller