4-Ch. Uhf Wireless Microphone System Kit
Features:
- UHF Band Receiver System
- Quad Frequency 4-Channel Design (Channel 1, 2, 3, 4)
- Broad Frequency Response Range & Low Distortion
- High Signal/Noise Ratio Performance
- RF Signal & AF Signal LED Indicators
- Radio Frequency and Audio Frequency
- Independent Channel Adjustable Volume Controls
- (4) XLR Output Connector Jacks
- Detachable Dual Antennas
- Rack Mountable System
What's in the Box:
- Microphone Base Receiver
- (2) Belt-Pack Transmitters
- (2) Handheld Microphones
- (2) Headset Microphones
- (2) Lavalier Microphones
- (8) 'AA' Batteries
- Rack Mount Hardware
- Wall Power Adapter
Handheld Microphone Specs:
- RF Power Output: >10dBm
- Modulation Type: FM
- Nominal Power Current: <55mA
- Spurious Emission: >55dBc
- Battery Powered, Require (2) x 'AA' Batteries -Each
Beltpack Transmitter Specs:
- Modulation Type: FM
- RF Power Output: >10dBm
- Nominal Power Current: <40mA
- Spurious Emission: >53dBc
- Battery Powered, Require (2) x 'AA' Batteries -Each
System Receiver Specs:
- Image & Spurious Rejection: >70dB
- Receiving Sensitivity: -105dBm
- Signal/Noise Ratio: >105dB
- Border Upon Channel Rejection: >70dB
- T.H.D.: <1%
- Audio Output Level: 0-300mV
- Power Supply: 110/220V (12-15V DC Power Adapter)
- Dimensions (L x W x H): 15.5'' x 9.3'' x 2.2'' -inches
QUESTIONS & ANSWERS
Ask a Question-
When do you expect replacement handheld mics for this system to be available? I would like to add a third handheld to use instead of one of the lavaliers.
We can recommend PDWMU103
-
I have the PDWM 4540 and need to replace the one of the handheld microphones, frequency 572.100MHz. Is that something I can buy as a single unit?
The microphone for this unit is currently not available
-
What is the pattern for the handheld ,mics? Cardioid, Omnidirectional, shotgun?
Handheld microphones are unidirectional
-
Good afternoon: I have two of the PDWM 4540 systems in our church system all with different frequencies. I am looking for replacement condenser headsets microphones with the adjustable boom mikes. The wires on two have broken. I need the screw on replacement for the wireless belt transmitter/ receiver. I have acquired the plugin type [PLM31] and they do not make connection for very long before pushing out. Any help with this would be appreciated.
-
Can I get transmitters that work on the frequency of the hand held mics so I can use 4 hands free mics at same time?
There is no belt pack that has the same frequency as the handheld microphone