Compact Reliable Unit
"I would buy this product again. Nice little unit."
Features:
Bluetooth Connectivity:
What's in the Box:
Technical Specs:
Hello Is your Pyle PLMRB29B able to be paired with bluetooth remote headsets? Regards
no it can not be paired with bluetooth remote headsets
I need the pig tail for this. Can i purchase just a pig tail that will work?
Does or can the plmrb29b unit use wireless speakers
The unit is for Passive speakers only
I have a unusual mounting question. I need to mount the deck with the face up configuration. Being this is a solid state unit is that a problem?
That will be fine.
Does this model have adjustable bass, treble?
Yes, it does have a Bass and Treble control
Hello. My unit powers on fine, but doesn't produce sound. Please advise.
Please make sure the three major lead wires for power are all connected
Yellow to constant +12v
RED to ACC +12v
BLACK to Ground or Negative
Make sure all speakers are properly wired
Won’t power on after reinstall
Please make sure the RED wire gets a+12 Volts ACC, YELLOW gets a +12 VOLTS CONSTANT POWER and BLACK to Negative/Ground
Is their a mic input on this unit?
There is no mic input. But it has a built in Mic
Can I only use 2 speakers with this model? If yes, what is the wiring?
Yes, it is possible to use only 2 speakers using the white and gray speaker line
I dont see a remote wire to go to my pyle amplifier? The blue wire is marked antenna on the diagram.
Yes it may be marked as Antenna power but it is also the remote power for the external amp
What inline amp fuse should be used with the plmrb29b model stereo
10 amps fuse will work for this unit
Can you use the outputs for a subwoofer?
Yes it is possible
Is there a wired waterproof remote available for this unit? I want to install the PLMRB29B head unit but replace my old Sony remote volume control panel on the stern of the boat near the swim deck.
There is no wired remote available for this unit
what is the w-l-d measurments of this unit
7-1/8” X 2-1/8”
What is the depth of the unit?
There is no specification available for the unit's depth.
will this unit fit in the same opening as the PLCD33MR ? and be a straight replacement?
Single Din Marine radio have similar dimension
is this unit a straight replacement for the PLCD33MR ?
Yes, it is
What is the length, width and depth of this radio?
178(W) x 108(D) x 50(H) mm
We have had this recently installed in our boat. We can receive over air radio signal that plays through the speakers. We are not able to connect through Blue Tooth Wireless or the Aux cable. Any suggestions?
Press the mode to go to Bluetooth, likewise to AUX. Aux port is at the front pannel using 3.5mm TRS
What are dimensions of the radio and what are dimensions of hole required?
A standard automobile radio body size. A DIN radio (single DIN) measures 2x7"
Hello, I have the PLMRB29B i’m trying to connect the power what is the yellow B+ connection for?
All power leads should be connected
RED >>>>> ACC +12V
YELLOW >> Constant +12V
BLUE >>>> (Optional) for external amplifier REM Trigger
BLACK >>> Negative or Ground
Can I hook an amp up to this?
YES
Hi, do you also deliver to Egypt? How much does delivery cost? I thank you in advance for the reply.
No, we do not ship outside the US teritorries.
What is the RMS power pushed out by this stereo?
75Watts x 4
What are the speakers that go with this radio? X4
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
can you get it without the bluethooh crap
If you are talking about the Bluetooth indication that it is connected, there is no option to have that removed.
How can I purchase a replacement remote for this unit
The led board is very dim how do I make it Brite
There is no brightness conntrol for the LCD panel