Waterproof Rated Off-Road Speakers
Features:
- Waterproof Rated Speakers
- Pro Audio Power Sports Amplifier System Kit
- 2-Channel Marine Audio Amplifier
- Marine Grade Rugged Construction
- Waterproof Rated & Weather-Resistant Connectors
- Integrated Power Wiring Harness
- Perfect for Custom Installations & Applications
- Ability to Connect & Stream Audio from External Devices
- Wired RCA Audio Input
- Speaker Wiring Connectivity
- Anti-Thump Turn-On
- Soft Turn On / Off
- Overload & Power Protection Circuitry
- Used for Watercraft & Portable Mobile Vehicle Sound Systems
What's in the Box:
- (2) 5.25’’-inch Marine Speakers
- (2) Speaker Connection Wires, 6.5' ft.
- (2) 1.75” Aluminum Mounting Brackets
- (2) 2” Aluminum Mounting Brackets
- (2) 6.5” x 0.95” x 0.67”Inches Rubber Pads
- (2) 5.7” x 0.95” x 0.67”Inches Rubber Pads
- (2) 6x50mm Hexagon Socket Head Cap Screws
- (2) Stainless Steel Nuts
- Compact Marine Amp
- (4) Butt Connector 16-22AWG
- Screw Bag
- (4) Nylon Wire Straps
Amplifier Technical Specs:
- Amplifier Type: 2-Ch. Audio Component
- Power Output: 1000 Watt MAX
- 2 x 50 Watts RMS @ 4 Ohm
- 2 x 150 Watts MAX @ 4 Ohm
- Marine Grade IP-45 Rating
- T.H.D:≤ 1%
- S/N Ratio:≥ 80dB
- Channel Separation:≥ 65dB
- Amp Freq. Response:20Hz- 20 kHz
- Fuse: 15A
- Power: DC 12V
- Amp Dimensions (L x W x H): 6” x 3.86” x 2.36” –inches
Marine Speaker Technical Specs:
- Power Output: 1000 Watts
- Marine Grade Waterproof Rating: IP-X45
- Speaker Size: 5.25’’ -inch (Each)
- Speaker Style: Passive Speakers
- Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
- Tweeter Type: Neodymium Dome (x2)
- Impedance: 4 Ohm
- Magnet Type: 24 oz. Circuit
- Mid-Woofer Voice Coil Type: 1'', Aluminum
- Sensitivity: 88 dB +/- 2 dB @ 1M/1W
- Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.75’’ ~ 2.0’’ –inches
- Speaker Dimensions: 6.5’’ x 7.1’’ x 9.5’’ -inches, with Bracket (-Each)
QUESTIONS & ANSWERS
Ask a Question-
I’m buying PLTM40F head unit. Do I need the amp if I’m wiring the speakers. Want to get a subwoofer as well. SBA10A.
PLTM40F is not coming up on the search. Can you please check the model
-
I would like to use my own amp already wired up and just like to plug up the speaker wires that’s all will it work?
It works best with the matching amplifier
-
How many amps dose this draw
Hi there, thanks for asking!
This PLUTV52CH can draw up to 15amps.
Have a great day! -
When I plugged my phone into the aux and the rca jacks, my music is not playing?
Please check if the Amp is getting power and is turning on
-
Where is the aux ports on the amplifier
It is the RCA jacks
-
Can this unit be used for Bluetooth only without a stereo
You can use an aux cord directly to the unit and connect your phone.
-
What's up dear friend, is this model built with bluetooth?
No there is no Bluetooth
-
I have a PLMCA51BT I’m in need of a new amplifier do you have a replacement for this amplifier that will work with my system
-
They don’t work plug them up and just clicking coming from them new out the box
If properly wired and not working. Check the warranty
-
Is this product bluetooth? I just purchased
it doesn't have a Bluetooth feature. You may use the RCA to 3.5 mm cable so can connect your phone using the amplifier.
-
I purchased the PLUTV52CH tower speakers with amp. When I connect it to my boat than my radio signal is full of static. The amp has it's own 12volt feed of positive and negative with 12gauge wire right back to the battery. The amp is also connected to the ignition switch so the amp is off when the key is off. The tuner has a filter on the power and ignition wires feeding the tuner. I have tried two other antennas with no change and the antenna is grounded. When I listen to music streaming through the Bluetooth than the system sounds great. If I unplug the fuse to the amp than the radio signal is fine. As soon as I plug in the fuse for the amp than I lose radio signal. Please... how do I fix this problem?
That is very unusual.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.