4-Ch Bluetooth Pro Audio Dj Sound Mixer
What’s in the Box:
Wireless Bluetooth Connectivity:
Extend Warranty Protection and Earn Rewards. Click HERE for Registration
QUESTIONS & ANSWERSAsk a Question
Currently on OSX 12.4 when I connect the mixer it shows up as "KT-08-UP" and I get a signal to my DAW but it is only Mono. Is there a way to get stereo?
It is one Track Mono for PC recording.
How do I purchase a replacement power supply? My is no longer working. LED light slowly blinks will not power up the unit.
Can you elaborate the connection between effect pedal, guitar amp and mixer together. I tried using the Aux send and return but can't figure out how to connect all the three devices together. Thank you again.
The guitar goes into the effects pedal and the output of the guitar pedals go's into the mixer 1&2 input or the 3&4 line inputs
Can this mixer be able to connect to an effect pedal and a guitar amp at the same time?
I have a Sennheiser e815s microphone connected via XLR cable to the PMXU43BT mixer. I have checked settings in mu Windows PC to make sure that the mixer is recognized and selected in the sound settings for the microphone input. The phantom power button is pressed down and no sound is being transmitted through the microphone. I have tried everything I can think of and even tried using different microphones. Need help with this.
Only Condenser microphones are the primary kind that requires +48V phantom power to operate the active circuitry inside. Cardioid Dynamic mic does not require Phantom power. Have the Gain setting at 11 O'Clock all EQ at 12 O'Clock and the Master Slide control at (0) zero db or we Unity Gain Level. Then slowly bring up the Microphone Input level to a desire output level
I have a PMXU43BT that we use for Zoom connection. I connected the USB cable to a new HP Laptop running Windows 11. The sound settings show the speaker and microphone connected to USBAudio2.0. The Zoom audio settings were set the same. However, the audio from the Pyle mixer was not going to the Zoom application and no sound was sent to the Zoom participants. The selector button for 3/4 or USB was down for USB. I changed Zoom to same as system and still got the same results. If a Zoom participant spoke the sound came to the mixer and into the room. I could get sound to the Zoom participants by switching the Zoom audio to a webcam I had connected to the computer. We have a Phenyx PTU-71 as the input to the mixer. My question is the HP has USB 3.0 connections and the mixer has a USB 2.0 connector. I don't know what the cable supplied with the mixer is, USB 3.0 or USB 2.0? On one computer USB port the mixer doesn't recognize the computer and shows BT. Does the HP computer need a driver? Do I need a USB 3.0 cable between the mixer and computer?
The USB cable supplied is a regular USB 2.0 Male to Male Type A to Type A Cable You can also use a USB 3.0 Male to Male Type A to Type A Cable.
On audio settings on your PC look for JeiLi BR17 as the external sound card
Are there drivers for this?
These units are plug-and-play.
To which mixer channel is the BT signal assigned? Is the BT signal affected by the DSP controls?
It go's to the Channel 3/4
when will you have this in stock?
There is no ETA on the replenishment of stocks yet but the units were already ordered
What type of usb cable is included? Also is the usb cable a data cable?
Please tell me the bit rate and sampling rate of this product. 4-Ch Bluetooth Pro Audio DJ Sound Mixer PMXU43BT https://pyleusa.com/collections/mixers-dj-controllers/products/pmxu43bt Best regards.
16 Bit DSP processor
My power cable for my PMXU43BT mixer was lost during a recent move. Is it possible to purchase a replacement 4-pin power cable?
What are the 16 DSP programs?
They are 16 different Reverb / Delay settings. The higher the number it goes the stronger Reverb / Delay.
it tells in the manual that you can select the REC state by the ''mode'' key but there is no REC state. Also, when I plug it in to my computer, nothing happens, no connection. My computer is a Dell. Thanks
When connecting the device to your computer, go to the audio settings then Sounds, on the dropdown menu select pyle as an external sound card and set it as default. exit setting and check if it is in sync with your DAW
When i plug in to my mac i set to be the main audio out but it dosent reproduce any sound, it only works as an input when i conect the usb cable? or it works also as an output?
Try to check different cables to connect with the unit.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
Hi. Does the PYLE PMXU43BT 4-Ch work with Adobe Audition? Is it possible to record multiple tracks using this mixer with Adobe Audition?
Yes, but it may need to be recorded one at a time for multi track
For the Main Output plugs there are two ports, should I connect 1 mono 1/4" to each port or 1 stereo 1/4" to each port?
use a TRS 1/4"
Why none of the links to download the user manual for PMXU43BT or (BT.5) work?