6-Channel Bluetooth Mixer - Pro Audio Control, 16 DSP Effects, USB Input

So I need an Amplifier? PMXU67BT

Yes

How can i connect output to a Yamaha rev-687AV

PMXU67BT  Main out 1/4" to RCA to any input on Yamaha rev-687AV

How will I attach this Mixer to My pc (I'm using Restream.io with OBS to Broadcast to Facebook & YouTube)? Our audio feeds are XLR mics into the mixer. We are using Elgato feeds from the Camers to the OBS Broadcast System. I am not sure What Cable format output feed from the Pyle Mixer will Feed ... to the Pc and What Format that end would be (USB or 1/8 Headphone?) Please Advise, Regards

https://www.amazon.com/UGREEN-Transfer-Enclosures-Printers-Cameras/dp/B00P0E39CM/ref=sr_1_5?dchild=1&keywords=USB%2Bto%2BUSB&qid=1614817352&sr=8-5&th=1

I have a mixer model PMXU4bt.I’ve never had a problem before recording directly onto a USB flash drive. However I recently bought a 128 GB Flash drive USB to plug-in to record podcast sessions. The USB port is not recognizing it as a USB port. I added music to it but usually if I plug it in with music with other USB Flash drives it automatically plays the songs and allows me to my voice or even the CD player I have plugged into one of the channels. What can I possibly be doing wrong with this new USB flash drive With 128 GB and I wasn’t doing wrong with the one USB flash drive I had before that’s 32 GB. Could it be a mixer USB plug is only USB to2,0 And a new flash drive is 3.0? Please help

Try to use 32 GB Flash Drive and see if it will read it and play music. If it does read it then it is an issue with the Flash Drive, but if it does not then it is an issue with the USB port

Is there a crossover built in with the sub outputs? In other words, when I plug in to the sub outputs does it engage the crossover?

The SUB Out are just dedicated channels for connecting the subwoofer. It is the Active or Powered subwoofers which have the Crossover.

Piggybacking off the question about hooking up to the computer and sending audio to computer: How do you do that?

1.Plug your mixer via USB cable into the USB port in your PC computer
2. Windows should automatically recognize your device as “USB Audio Device” or as “USB Audio CODEC” – and it should automatically install any necessary drivers
3.To manually change your PC’s default sound device, go to start, settings, and then control panel and right-click (or double-click) sounds, speech, and audio devices link. A dialogue box should appear. Once it does, click on the audio In the pull-down menu.

Can this mixer be used with a projector and receiver

Yes, it can be used with a projector and receiver

con i hook this up to a computer and send audio to my computer

Yes you can do that

I want to use the PMXU67BT as my interface to connect my guitar to and ply through my computer with AmpliTube 5 but i'm having issues like not playing through there guitars and feedback, but I don't know what seeting to have it on, plus are there drivers I need to work with my mixer?

The PMXU67BT is a class-compliant USB mixer, so it generally does not require a separate driver on modern Windows or macOS systems. However, it functions as a 2-channel USB audio device, not a dedicated low-latency guitar interface, which can make software like AmpliTube more sensitive to setup issues.

For best results, connect your guitar to a mixer input, select the PMXU67BT as both the input and output device in AmpliTube, and disable any direct monitoring paths that could cause you to hear both the dry guitar signal and the processed signal at the same time. Feedback is often caused by the output being routed back into an active input channel or by speakers being too close to the guitar.

If you're using Windows, installing and selecting ASIO4ALL in AmpliTube can often reduce latency and improve performance with USB mixers like this one.

Can you record directly to a U Disk? Or USB thumb drive.

YES

Can you stream music through the computer usb connection? Such as playing your ITunes music or other streaming services?

Yes it is possible

Does this act as an HID device, or is it midi or dmx?

Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.