-
Why do the front panel led lights flash but the unit is operating normally?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Does this support a passive subwoofer?
It can but you will need an electronic crossover
-
I just bought this product. I hooked it up to a pyle blu tooth receiver unit. It cuts out and does not play at high volumes. Makes a ticking sound in the unit. What could be the problem?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
What are the watts rating @ 8 ohms when you bridge it?
100 Watts @ 8Ohms 200Watt on Bridge
-
Am I able to use volume control knobs with this unit? Example is OSD 100w
No. the Watts are too high for the volume knobs
-
Is there a way the pt8000ch will accept 12vdc trigger from a preamp allowing it to be turned on and off by the preamp without using the main switch?
It is possible using the 12 to 15 volt AC/DC INPUT Trigger
-
olo estou interessado em comprar,mas qual a distorção harmonica?
La información que busca no está en nuestra documentación
-
How many rms watts per channel does this amplifier have at 4ohms ? Please call me 941 600 6386
The RMS Watts for PT8000CH is 200W x 8-Ch @ 4Ohm
-
Hi, I have MarantzSR6014 receiver which is 11.2 channels in my home theater. However, Marantze said that I need to purchase an external amplifier to bridge either 2 rear Atmos speakers or front 3 speakers to get full 11.2 channels. Currently without amplifier it only gives 9.2 speakers. can I use this Amplifier to bridge 2 rear Atmos speakers or front 3 (left, right and center) speakers to connect to my Marantze SR6014 receiver.
We have checked your unit specification and it looks like that all outputs for speakers are provided on the amp. The external amp would only be for additional power and speaker
-
Algo compatible con este como un ecualizador o que le hace falta
El PT8000CH es un amplificador de potencia multizona masivo (de 8 canales). Al ser un amplificador de potencia "puro", su única función es tomar una señal de audio y darle la fuerza necesaria para mover tus altavoces. No tiene controles para ajustar graves, agudos ni frecuencias específicas.
-
Does it have central speaker for surround home teacher ?
Yes, the Pyle PT8000CH does support a center speaker connection for surround sound/home theater setup. It has dedicated terminals for center, front, and rear surround speakers, so you can connect a full surround speaker system to the receiver.
-
What is the 8ohm rms output bridged on a pt8000ch
- RMS Power Output: 100W x 8-Ch @ 8Ohm
-
Pyle ,
will You Guys
will have this Amp
once more , please , ?
You can purchase directly from us
https://pyleusa.com/products/pt8000ch?variant=40212409450531
-
Is this out of stock or discontinued? Fingers crossed it's only out of stock.....
For now, we do not aby stock with the unit and this unit is not discontinued.
-
Is it possible to feed this with a stereo preamp and power 8 pairs of speakers?
Please contact us through our email support system to assist you further with your concern. Simply go to pyleusa.com, click on the CONNECT tab, and then in the drop-down menu, choose Contact Us. Fill out the form, and in the last part, you will have the option to write your subject, and in the comment box, you can also write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800, ext. 2, during the weekdays from 9 am to 6 pm EST.
-
After installing my new 8-channel amp, I tried finding the serial number to register the unit, but can’t find it. Where should I look?
Try to look for the serial number of the unit on its panels.
-
how do you turn on PT8000CH from a Denon Receiver X4700?
the 12V trigger in PT8000CH is OUTPUT and not Input.
the PT8000CH Input is a 12-15V A/C or DC to trigger power up. Is there a cable to this from Denon X4700 3.5mm Trigger Output?
Thanks.
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Can I control the volume of Chanel’s from my smart phone?
If using BT mode, yes. But the master volume will work on the unit only.
-
Hi,
I am interested in the PT8000CH amplifier. I am looking for HiFi equipment. Can you share more detailed technical specifications? For example:
Output impedance min/max
electronic type AB, class-D, Class-T, etc.
Frequency response + - 3dB
Damping factor
Distortion (
Here are the technical specs of the unit.
- Technical Specs:
- MAX Power Output: 8-Ch. x 1000 Watt
- RMS Power Output: 100W x 8-Ch @ 8Ohm
- T.H.D.: <1%
- Rack Mountable: 4U Rack Space
- Power: 115/230V Switchable (DC 12-15V)
- Dimension (W x D x H): 19.0'' x 19.3'' x 7.1''
-
-
Can this amp be shipped to a residential address in Mexico
We only ship inside the US.
-
What is the signal to noise ratio on this amp?
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Do you sell the power trigger cord for this
Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
The user manual is missing diagrams. I want to set up a Multi-zone (example #6)
We ca share a PDF through email Please contact us through our email support system to assist you further with your concern. Simply Go to pyleusa.com click on the CONNECT tab then on the drop-down choose Contact Us. Fill out the form and in the last part, you will have an option to write your Subject, and also on the comment box, you can write your concern about the product. Please allow at least 12 to 24 hours for someone to get back to you. You can also contact our support hotline at 718-535-1800 ext 2 during weekdays from 9 am to 6 pm EST.
-
Where can I buy replacement resistors for this model
Internal repair needs to be sent to the service center for repair
-
Are the fans noisy? Can they be disabled?
very minimal noise
-
How can I connect a subwoofer with speaker wires to this unit
You can connect it the same way as a passive speaker. But you will need to use a Low pass crossover for the sub
-
Where can I buy a 3.5mm male to 2.1mm x 5mm male cable to connect my input trigger?
The connector available on amazon are 3.5mm x 1.35mm and 5.5mm x 2.5mm
-
What type of connector is used for the input trigger for the PT8000CH?
DC Power Cable 5.5mm x 2.1mm Male Plug
-
I am connecting two passive subwoofers to my receiver's pre-outs. How do I connect the subwoofers from the receiver to the amplifier?
You may use any of the speaker output of the PT8000CH. However, you will need a Crossover with Subwoofer Output
https://www.amazon.com/ART-CX311-Crossover-Subwoofer-Output/dp/B004S2Q5T6/ref=sr_1_2?crid=OEHI4VHSI659&keywords=pro+electronic+crossover&qid=1660161109&sprefix=pro+electronic+crossover%2Caps%2C572&sr=8-2
